ABB DCS500 spare parts： SDCS-PIN-41 3BSE004939R1 Tested It In Good Condition

Miya(manager)

Email:miya@mvme.cn

Skype:miyazheng520

QQ :2851195450

Tel:0592-5087576

86-18020776792

Moore LIMITED is committed to improve the level of world automation parts supply. No matter what the customer is, no matter how rare the accessories we need, we can always connect the customer with their desired product. It is a wide range of industrial automation spare parts for customers

around the world.

Has sold 68,268,313 stock parts for customers .

More than a thousand excellent manufacturers for you to choose10 million inventory, adequate supply

We are achieving faster speed.

SDCS-PIN-41A 3BSE004939R1

Compatibility of SDCS-PIN-20x boards

The SDCS-PIN-20xB boards replaces SDCS-PIN-20xA and SDCS- PIN-20x boards, but not vice versa. Note: SDCS-PIN-20xA replaces SDCS-PIN-20x, but not vice versa.

Compatibility of SDCS-PIN-20x and SDCS-PIN-2x boards

Converters 100A ≤ IDC ≤ 350A and UAC: 400V/500V - SDCS-PIN-21 or - SDCS-PIN-205B/205A/205 can be used as spare parts. Converters 405A ≤ IDC ≤ 520A and UAC: 400V/500V - SDCS-PIN-22 together with SDCS-PIR-21 or - SDCS-PIN-205B/205A/205 can be used as spare parts. Converters IDC = 700A and UAC: 400V/500V (type C2) - SDCS-PIN-25 together with RC network (possible only in converters with an A in their serial number) or - SDCS-PIN-205B/205A/205 can be used as spare parts (pos- sible in converters with an A or B in their serial number). In an A converter do not connect the RC network. Note: In a B converter only SDCS-PIN205B/205A/205 boards are usable, because the RC network is missing. Converters 610A ≤ IDC ≤ 1000A and UAC: 400V/500V (type C2b) only - SDCS-PIN-205B can be used as spare part. Converters 100A ≤ IDC ≤ 270A and UAC: 600V - SDCS-PIN-23 - SDCS-PIN-206B/206A/206 can be used as spare parts. Converters IDC = 405A/450A and UAC: 600V - SDCS-PIN-24 together with SDCS-PIR-21 or - SDCS-PIN-206B/206A/206 can be used as spare parts. Note: In addition to above mentioned limitations make sure that the resistors are cut properly according to the table ‘Settings of the SDCS-PIN-20xB board’ as described in the manual Techni- cal Data. Especially when a board is reused!

Change SDCS-PIN-2x boards

The converter is equipped with a SDCD-PIN-21/22/23/24 board: - Make sure, electrical and mechanical safety is obtained! - Mark the cables connected to U1, V1, W1 and C1, D1. Mark the plugs connected to X22, X3 and X4. - Disconnect all cables and plugs. - Remove the SDCS-PIN-2x board. Note: If the converter is equipped with a SDCS-PIR-21 there is no need to remove this board separately, because it is mounted on the SDCS-PIN-2x board. - Make sure that the resistors on the new board are cut properly according to the table ‘Settings of the SDCS-PIN-20xB board’ as described in the manual Technical Data. - Install the new SDCS-PIN-20xB board. Note: SDCS-PIN-205B replaces SDCS-PIN21/23 and SDCS- PIN-206B replaces SDCS-PIN-22/24. - Reconnect all cables and plugs. The converter is equipped with a SDCD-PIN-25 board: - Make sure, electrical and mechanical safety is obtained! - Mark the cables connected to U1, V1, W1 and C1, D1. Mark the plugs connected to X22, X3 and X4. - Disconnect all cables and plugs. - Remove the SDCS-PIN-25 board. Note: The additional RC network is not needed anymore. Due to safety reasons remove the cables marked U1 – C14, V1 – C16, W1 – C12, C1 – R15 and D1 – R12. - Make sure that the resistors on the new board are cut properly according to the table ‘Settings of the SDCS-PIN-205B board’ as described in the manual Technical Data. - Install the new SDCS-PIN-205B board. Note: SDCS-PIN-205B replaces SDCS-PIN25. - Reconnect all cables and plugs.

Related products

Our advantages:

Industrial automation spare parts failure often causes tens of thousands of business losses to the enterprise.Moore LIMITED is the world's leading provider of high quality industrial automation spare parts, whether it is a new spare parts, or outdated / discontinued parts, and the technology is dedicated to the normal operation of the enterprise at the best cost, the best quality and efficient way.Whether it is customer service, work efficiency or delivery speed, we always strive for excellence and to be better and better.

If you have any question pls do not hesitate to contact us.We can supply all kind of the automaiton parts,if you want to purchase parts pls send the parts model to my mail, I will prompt reply you asa I receive the mail.Hope anyone enquire from us.

Waiting for your inquiry.

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.