Cheaper Tank Mounted 15Kw 20Hp screw air compressor air
dryer,filters combined
Compact, heavy duty, quiet and highly reliable belt &direct
driven rotary screw compressors series, to satisfy all the
requirements.
The LGSD series comprises a comprehensive range of premium quality
rotary screw air compressors from 4 kW to 15 kW. Each model is
constructed to the highest standard using the best quality
components in order to ensure a long life and total reliability.
The design of the LGSD series benefits from years of experience in
the production of innovative high quality air compressors where
attention to detail and quality are at the highest level.
Smart Integration
1. A Revolutionary Advancement
Going far beyond combining the compressor, dryer and filters in one
package, smart integration also:
• Eliminates vulnerable interconnecting piping
• Minimizes pressure losses and drops
• Integrates the compressor, dryer and filter into an
energy-reducing, optimized system
• Incorporates the entire supply-side system into one whisper-quiet
package, enabling installation virtually anywhere
• Provides generous space to promote cooling and to allow
unobstructed service
2. Dry and Clean Compressed Air
The Right Air Quality to do the Job
• All Total Air System packages come fully equipped with an
integral, energy-saving air treatment center including a
high-performance air dryer and filtration pack to remove water, oil
and particles from the air stream.
• All components are perfectly matched to deliver the right air
quality to increase air-powered tool and system equipment life.
3. High-efficiency Components
Setting the Standard in System Design
The Total Air System incorporates only the highest quality
components to ensure that both system efficiency and productivity
are maximized-- a high-efficiency compressor room without the
hassle, complexity and costs of the traditional compressor room.
Total Air System packages come fully equipped with:
• A high-efficiency rotary screw air compressor
• An energy-saving cycling refrigerated air dryer
• A high-efficiency coalescing filter
• A high-efficiency particulate filter
• An integral air receiver storage tank
• Integrated compressor and dryer controls
• Low pressure drop piping
4 Life time benefits
(Benefits are virtually endless )
• Plug-and-play simplicity--eliminates the leading causes of
failure in air systems: incorrect sizing and installation
• Virtually no install costs--eliminates 80% of install time,
material and costs
• Integral packaging saves valuable floor space for other uses.
• Lifetime power savings through highly efficient components
• Increased productivity through better air quality-Eliminates
water and corrosion resulting in extended tool and equipment life
EVO® – Screw air ends
Reliable and versatile
Our oil-injected screw air ends create the heart of your compressor
system. Used with our wide range of components, you can build the
perfect compressor package with ultimate efficiency, low noise, at
the highest quality standards.
Advantages of our new EVO® technology Ultimate efficiency and
reduced noise through
New ROLLING PROFILE® – ultimate efficiency with
reduced noise
Long life cycle due to increased bearing dimensions
and wear-free ROLLING PROFILE®
Wide operating pressure range from 5 to 15 barg
High quality manufacturing and assembling –
“Made in Germany”
Quality assurance – bench test of every air end
before leaving our factory
Easy application selection with our new
ROTORCOMP® SIZING AIR software
Highest flexibility for your package design
• Suitable for all types of drive driving motors
• Drive options: Belt drive, direct drive, internal
Model |
Tank |
Power |
Air delivered | Max. Pressure | Sound level |
Connection |
Net Weights | Net Dimensions L x W x H |
| lt | kW | HP | m3/min. | m3/h | CFM | bar | p.s.i. | dB(A) | G | Kg | (cm) |
| LGSD 15-08-500 | 500 | 15 | 20 | 1.65 | 129 | 75.9 | 8 | 116 | 68 | 1-1/2" | 600 | 130 x 85 x 165 |
| Note: |
| 1. The above parameters and color are designed according to
customer needs, the parameters are for reference only, the final
parameters of the drawings shall prevail; |
| 2. According to user requirements and needs, to join way: air/water
cooling, oil content, weight, appearance size according to the need
to design, to the final order and the technical agreement shall
prevail; |
3. Frequency converters (optional).
4. 1 years warranty, 5 years warranty for air end |
Screw air compressor main spare parts configuration:
| Item | Parts | Brand |
| 1 | Air end | Rotorcomp(Germany) |
| 2 | Intake Valve | Rotorcomp(Germany) |
| 3 | Solenoid Valve | Danfoss(Danmark) |
| 4 | Temperature sensor | Danfoss(Danmark) |
| 5 | Pressure sensor | Huba original (from Switzerland) |
| 6 | Motor | Hebei |
| 8 | Thermostat Valve | Rotorcomp |
| 9 | PLC | PLOT |
| 10 | Minimal Pressure Valve | rotorcomp |
| 11 | Air filter element | Mann(Germany) |
| 12 | Oil filter element | Mann(Germany) |
| 13 | Oil separator element | Mann(Germany) |
| 14 | Bearing | Sweden SKF (Life 60000 hours) |
| | |
