Hi Speed Automatic Blowing Machine , PLC Control Pet Bottle Machine
With 2 Cavity
YCQ series is a stable two-step blow-down stretch automatic blowing
machine.It can be used from 2 cavity to 6 cavity with a speed of
1000 bottles per hour (500 ml plastic bottles),max volume 2L
plastic bottle,suitable for blowing any kind of carbonated beverage
bottle,sparkling beverage bottle,pure water bottle, mineral water
bottle,fruit juice beverage bottle,cosmetic bottles,large diameter
bottles, high temperature resistance bottles and other packaging
bottles.
Feature:
A. Advanced PLC control system, stable and excellent performance.
B. Conveyor belt automatically feeds preforms.
C. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the
infrared pre-heater.
D. High adaptability,preform absorbs heat by adjusting the distance
between lamp and reflector.With automatic constant temperature
device,temperature is kept within a certain range.
E. Safety locks are provided during each mechanical action to
protect operator's safety.
F. Use cylinder instead of hydraulic cylinder, low pollution, low
noise.
G. Use different air pressure for blowing and machine
operation,energy saving and environmental protection.
H. Equipped with high pressure and double-crank linkage clamping,
providing high clamping force.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, unique valve position design makes blowing
process easier to control
K. Low-cost, high-efficiency, easy-to-operate, easy-to-maintain,
advanced automatic process flow.
L. Avoid bottle contamination
M. Protection of low temperature cooling system
N. Easy to install and start
O. Low scrap rate
Machine specifaction
| Main machine (blowert + oven) | Item | YC-2L-2 |
| Product Spec | Max. product volume(L/cav) | 2 |
| Max. preform neck size(mm) | 100 |
| Max. product diameter(mm) | 180 |
| Max. product height (mm) | 300 |
| Cavities | 2 |
| Blow molding part | Die force (KN) | 100 |
| Die stroke (mm) | 270 |
| Max. mould size(mm) | 390*345 |
| Mould thickness | Adjustable |
| Mould spacing(mm) | Adiustable |
| Max. pulling stroke(mm) | 400 |
| Operation pressure(Mpa) | 0.8-1.0 |
Operation air pressure consumption (1tr/min) | 200 |
| Blow pressure(Mpa) | 1.2-2.8 |
| Blow air pressure consumption (1tr/min) | 300 |
| Output(pcs/h) | 800 |
| Machine size(LxWxH)(m) | 1.46*0.58*1.8 |
| Machine weight(KG) | 650 |
| Oven | Temperature grade(rate) | 8 |
| Heating time(S) | 90-200 |
| Voltage(V) | 220 or as your request |
| Frequency(HZ) | 50/60 |
| Total power(KW) | 16 |
| Oven Size (LxWxH) | 1.35*0.55*1.15 |
| Oven weight (KG) | 300 |
Claim System
Working Process
Factory overview
Mold
| How about our after-sale service ? |
Provide whole drawing for the perform mould and bottle mould. Free charge for word design on the mould. We can help you
install the machine; from setting machine, testing, and to check
the machine is on the good working condition. There is a litter
charge, only for flight charge and accommodation.
Warranty:
We response for one year warranty for the machine, however, it without any human conduct. And provide one-year free
spare part for client.
Up 15 million shots for the bottle mould.
3 million shots for the perform mould, cap mould.
All moulds are designed by CAD/CAM.
We also can provide the drawing for the mould, help you to maintain
the mould, and machine.
