DO NOT ADD "NOTES TO THE SELLER" DURING CHECKOUT We strive to ship your order as fast as possible so we utilize an
automated processing system. Because of this, these messages are
not displayed and will not be seen by any of our staff. If you have
questions/requests/comments/information, send us an eBay message or
give us a call
Important Safety Advisory As with any component you purchase for your vehicle, installation
should be done by a qualified technician. We've provided the
following information as a general reference for purchasing and
installing these spacers/adapters. The following list isn't
all-inclusive and may be different depending on the vehicle you
drive, type of wheels you have, and ideal setup you're trying to
achieve. Failure to install properly may cause your lug nuts/wheel
studs/spacers to loosen or break while driving. If you are not
confident or familiar with the installation, please ask a trained
professional for help.
Before Purchasing - Measure your wheel gap for clearance. You will need at least
2.0" (50mm) of clearance to prevent the wheel/tire from hitting the
fender or fenderliner. - The vehicle’s wheel studs need to be
measured. If the studs are longer than 2.0" (50mm), it will extend
past the spacer's surface. It may not be possible to bolt the wheel
safely onto the spacer, depending on whether your wheels have
pockets/cavities around the mounting pad. - If your vehicle does
not have 10x1.25 threaded wheel studs, you would need to purchase
the correct threaded lug nuts for proper installation.
Before Installation Check compatibility of spacer-to-hub, spacer-to-wheel, and lug
nuts (thread pitch & seat type)
During Installation - Installation should be performed by a trained professional using
proper tools. - Avoid using an impact wrench or any pneumatic
tools; improper usage may cause damage to components. - Ensure
proper thread engagement. Typically, its a minimum of 5-8 turns
before the lug nut tightens, however, it varies depending on thread
pitch and type of vehicle. - ALL Lug nuts MUST be torqued to
manufacture specifications.
After Installation - Test drive your vehicle to ensure the hardware is installed
properly. Pay close attention for any noises, vibrations, or
compatibility issues (such as fender rubbing). - Inspect and
re-torque ALL lug nuts after 25-50 miles of driving
Note: No returns or exchanges once product has been installed on
the vehicle.
