Sign In | Join Free | My burrillandco.com
Home > Switching Power Supply >

8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400

    Buy cheap 8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400 from wholesalers
     
    Buy cheap 8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400 from wholesalers
    • Buy cheap 8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400 from wholesalers
    • Buy cheap 8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400 from wholesalers
    • Buy cheap 8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400 from wholesalers

    8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400

    Ask Lasest Price
    Brand Name : Schneider
    Model Number : 140CRP93100
    Price : negotiable
    Payment Terms : T/T, Western Union
    Supply Ability : 100
    Delivery Time : 2-3 work days
    • Product Details
    • Company Profile

    8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400

    Redundant Power Supply Module 24V 8A Redundante Schneider Electric Modicon Quantum 140CPS22400


    Specifications

    Manufacturer:Modicon Quantum
    Series:Power Supplies
    Weight:2 lb
    Power supply type:Redundant
    Input voltage:24 V DC 20...30 V
    Input current:<= 3800 mA
    Inrush current:25 A 24 V
    14 A 20 V
    Input power interruption:1 ms 20 V
    <= 100 ms
    Associated fuse rating:5 A slow-blow
    Output voltage:5.1 V DC
    Power supply output current:8 A redundant
    Output overvoltage protection:Internal
    Output overload protection:2.3 x maximum rated input voltage for 1.3 ms
    Power dissipation:6 + (1.8 x Iout) where Iout is in A
    Alarm output:1 NC 6 A 220 V power supply fault
    Local signalling:1 LED green power (PWR OK)
    Marking:CE
    Module format:Standard

    OTHER SUPERIOR PRODUCTS

    Yasakawa Motor, Driver SG-Mitsubishi Motor HC-,HA-
    Westinghouse Modules 1C-,5X-Emerson VE-,KJ-
    Honeywell TC-,TK-GE Modules IC -
    Fanuc motor A0-Yokogawa transmitter EJA-
    Contact person: Anna
    E-mail: wisdomlongkeji@163.com
    Cellphone: +0086-13534205279
    Similar Products
    140DAI34000
    140DAI35300
    140DAI44000
    140DAI45300
    140DAI54000
    140DAI54300
    140DAI55300
    140DAI74000
    140DAI75300
    140DAM59000
    140DAO84000
    140DAO84010
    140DAO84210
    140DAO84220
    140DAO85300
    140DDI15310
    140DDI35300
    140DDI35310
    140DDI36400
    140DDI67300
    140DDI84100
    140DDI85300
    Environment
    standards
    CSA C22.2 No 142
    UL 508
    product certifications
    CUL
    FM Class 1 Division 2
    resistance to electrostatic discharge
    4 kV contact conforming to IEC 801-2
    8 kV on air conforming to IEC 801-2
    resistance to electromagnetic fields
    10 V/m 80...2000 MHz conforming to IEC 801-3
    ambient air temperature for operation
    0...60 °C
    ambient air temperature for storage
    -40...85 °C
    relative humidity
    95 % without condensation
    operating altitude
    <= 5000 m
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    Compliant - since 0901 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity
    REACh
    Product environmental profile
    Product end of life instructions
    Available
    Contractual warranty
    Warranty period
    18 months

    Understanding and Using Cut Wire Detection

    If the electrical current between the input and the sensor is more than 1 mA, the wire is detected as not cut. If this current is less than 1 mA, the wire is detected as broken and the corresponding input’s red LED is lit.
    If you install dry contact sensors, the corresponding input’s red LED will be lit whenever the contact is open and the current will be at 0 mA. To solve this and use cut wire detection properly, Schneider Electric recommends installing a pull-up resistor on the sensors so that the minimum current of 1 mA will be reached. You can use a 15 kohms pull-up resistor or work out the value you need. See the sensor
    example in the illustration above.


    Illustration

    The following figure shows the wiring diagram for the 140CRP93100 module


    power supply: 24 VDC
    fuse: 1 A fast blow fuse
    pull-up resistor (in sensor example): 15 kOhms
    NOTE: There is only one group of 16 inputs. All common 24 V are internally connected and all common 0 V are also internally connected. The two pins of a same input (e. g: pin 1 and 2 for input 1) are internally connected too so that you can use either the right pin or the left one.

    Quality 8A Redundant Power Supply Module 5.1 V DC Output Voltage Modicon Quantum 140CPS22400 for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Wisdomlong Technology CO.,LTD
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Redundant Power Supply Module products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0