Launch DIY Scanner CReader 9081 Full OBD2 functions Online update
Oil,EPB,BMS,SAS,DPF,TPMS reset with ABS,SRS systeams
Highlight:
MULTIFUNCTION SCAN TOOL: CReader 9081 is a small car maintenance
tool integrating OBD diagnostic functions with 11 reset functions.
It can fast scan and clear trouble codes. No batteries, supply
power through OBDII cable.
EASY TO USE: All-in-one screen and easy-to-use hotkeys make the
9081 an ideal tool for the DIYer and professional technicians
alike. Thoughtful design elements like Quick access with hot keys;
Durable buttons with metal covers to prolong life; and Extended
cover connections to maximize protection will allow this unit to
last through years of constant use and abuse. Three kinds of
language (English, France and Spanish) user guide help users to use
more convenient.
FULL OBD FUNTION: OBD Full function; Works on cars that suport
OBDII, from 1996 to present (America cars), 2002 to present (Europe
cars), 2008 to present (Asia cars), 2005 to present (Japanese
cars).
RESET FUNTION: Support Electrical Parking Brake(EPB) reset; Battery
Management System(BMS) reset; Steering Angle Sensor(SAS) reset;
Diesel Particulate Filter(DPF) reset; TPMS Reset; Works on 46 car
models, see for more models.
FREE UPGRADE and MULTI-LANGUAGE: Free update via internet. There
are 2 methods available to update your tool: Via TF card or USB
cable, the TF card and USB cable are included in the product.
Product Introduction:
CReader 9081 is a small car maintenance tool integrating OBD
diagnostic functions with 11 reset functions. It has a 4.0-inch
color display and provides quick diagnosis for over 40 European,
American, and Asian mainstream car models.
Support Languages:
English, French, German, Spanish, Russian, Portuguese, Janpanes
Product Functions:
1. OBD full functions
1) Read dynamic data streams and MIL
2) Read readiness status
3) Query freeze frame data
4) Read current DTCs
5) Clear DTCs
6) O2 sensor test
7) On-board monitor test
8) Read pending DTCs
9) On-board system or component control
10) Read vehicle information
11) Read permanent DTCs
2. Oil reset
3. EPB reset
4. BMS reset
5. SAS reset
6. DPF reset
7. TPMS reset
8. Throttle matching
9. ABS brake bleeding
10. Tooth learning
11. Anti-theft matching
12. Injector programming
13. Query DTCs
14. PC internet update
15. Multilingual support
16. Print data via PC
Specifications:
| Screen: | | 4.0"TFT 320*480 dpi |
| Voltage Range | | 9-18V |
| Operating Temperature: | | 0℃~ 50℃(32℉-122℉) |
| Environment Temperature: | | -20℃~70℃(-4℉-158℉) |
| Dimension: | | 195mm*86mm*32 mm (7.6" *3.4" *1.2") |
| Weight: | | <460g |
How to update the software of CR9081?
1. Go to the official website of LAUNCH "www.dbscar.com", click
"Products" -> "creader 4001~9081"; find the "creader 9081", then
down load the update tool to your computer.
2. Install the update tool on your computer
3. Connect the Creader 9081 to your computer via the USD data lines
in the package.
4. Run the update tool software, fill in the serial number and
register code of creader 9081 (The serial number and register code
will be found on the screen when you conect creader 9081 to your
PC), click the update. Please keep the device connected and ensure
the network works well.
