Semi Auto SMT Stencil Printer 1.2M LED Light Screen Machine CE Certification

Semi-auto solder paste printer LED SMT Stencil Printer 1.2M LED Light screen machine

Quick Detail

1, Taiwan's silver linear guide rails are used to control the Panasonic motor to drive the blade holder.

To ensure print quality, the IC pitch is 0.3mm or more.

2. The printing blade can be rotated upwards by 45°, which is easy to clean and replace the printing plate and scraper.

3, the blade seat can be adjusted before and after, to select the appropriate printing position.

4. Combined printing platen, with fixed groove and positioning PIN, easy to install and adjust for single and double panel printing.

5. The school board adopts stencil net movement, combined with X, Y and Z corrections of the printed PCB board. It is convenient and quick.

6. One-way and two-way printing can be set.

7, with automatic counting function to facilitate production statistics.

8, using Taiwan Tai Ling Microcomputer PLC control Taiwan Taiwan Ling touch screen man-machine dialogue.

9, two for the relay, button switch control, electrical appliances are imported equipment.

Feature

Application

First, touch screen operation interface, PLC control system is simple and stable;
Manual, semi-automatic, automatic triple function conversion;
Double-key operation at the same time can start the machine to operate more safely;
The control system adopts the suspension type bonding on the electric box door, which is convenient for maintenance and maintenance to prevent foreign matter from falling into the electric equipment and causing danger;


Undefined

Second, all-aluminum honeycomb operating table, with L-shaped bracket to facilitate fixing PCB circuit board position;
Front and rear, left, right, and angle adjust the position of the console to facilitate accurate alignment of the PCB board
With the position of the steel plate, the accuracy of the printed solder paste is guaranteed.
The multi-thin pin support PCB circuit board makes the circuit board not deform when the solder paste is printed in the horizontal state, so as to ensure the uniformity of the printed solder paste.
Fine adjustment using bearing coordination, reducing the error when X Y θ adjustment, more flexible;



Undefined
Third, the quality of the cylinder lift head position is close to the upper and lower limit when arriving slowly, on the precision screw
The position of the trimming head makes the stencil more securely in contact with the PCB board, thus ensuring the printing
Paste thickness.
The use of positioning sets of abrasive tools positioning, positioning more accurate. Improve printing accuracy, printing 0.3mmIC and BGA, QFP, 0201 and other components.



Undefined

Fourth, high-quality cylinder head position of the blade lift, precision screw fine-tuning the position of the blade, so that the blade and the steel mesh perfect contact, increase the service life of the steel mesh, to ensure the uniformity of the printed solder paste.



Undefined
5. The high-quality synchronous motor drives the synchronous belt conveying printing head to run smoothly and accurately so as to ensure the uniformity of the printed solder paste.


Undefined
IMG_20140708_114641
Technical Services:

1. Pre-sales consultation: provide pre-sale professional SMT line solutions

2. Original warranty: The original factory provides one-year free warranty service, motor parts warranty for three years,
Electrical accessories warranty 2 years, non-human damage

3. On-site installation: installation and commissioning on site to ensure smooth production

4. Technical Training: Providing Level 1 to Level 3 Professional Training

5. Technical Support: Service Center provides 7*24 hours technical support and remote monitoring and equipment installation
video

6. Software upgrades: All products provide free software upgrades for life

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.