| Board width | Max230mm |
| PCB board transportation height | 760±10mm |
| PCB board transport speed | 0-1.8M/Min |
| Preheat zone length | 600mm |
| Preheat zone number | 1 |
| Preheat zone power | 3kw |
| Preheat zone temperature | Room temperature-180°C |
| heating method | Infrared |
| Cooling area number | 1 |
| cooling method | Axial fan cooling |
| Tin furnace power | 12kw |
| Soldering tin quantity | 180KG |
| Tin furnace temperature | Room temperature -300°C |
| Transportation direction | about |
| Temperature control method | PID temperature control |
| Whole control method | Key operation |
| Flux capacity | Max5.2L |
| Spray method | Japan SMC rodless cylinder + Japan Meiji nozzle |
| power supply | 3-phase 5-wire system 380V |
| Starting power | 16kw |
| Normal operating power | 4.5kw |
| Productivity | 2000-3000pcs/8hfs |
| Gas source | 4-7KG/CM2 12.5L/Min |
| Frame size | L1800×W1100×H1600MM |
| Dimensions | L2500×W1100×H1600MM |
| weight | Approx.650kg |
| matter | performance |
| PCB board requirements | |
| Basic PCB size | Standard machine W=50-230mm |
| Component height limitation on PCB | 100mm |
| PCB board transport direction | Standard Left-right |
| Spray part | |
| Nozzle | The use of Japan Meiji nozzle, spray range 20-65mm fan adjustable, |
| | Spray head height 50-200mm adjustable, maximum flow 60ml/min |
| Air system | Imported filters, control valves and fittings, digital display |
| Spray nozzle movement system | Japan Koganei rodless cylinder drive, Japan Mitsubishi PLC
intelligent control, optional spray |
| Head movement method | Rodless cylinder drive |
| Flux Filtration Recovery System | Exhaust system: stainless steel mesh filter, using the
characteristics of the fluid to maximize the filtration recovery of
excess flux |
| Preheating parts | |
| Extended warm-up area | 1 section infrared warm-up total length 600mm, temperature
independent control |
| Temperature control method | PID temperature control |
| Heating element | Taiwan Taiwan Exhibition high temperature ceramic heating tube |
| Preheat power | Total power 3kw |
| Installation mode | Heat pipe modular design, easy maintenance and maintenance |
| Tin furnace parts | |
| Tin furnace material | 304SUS 3MM thick |
| Solder tin melting capacity | 200kg |
| Tin furnace temperature range | Room temperature -300°C |
| Height adjustment range | 0-120mm |
| Tin furnace power | 12kw |
| Tin furnace movement | Manually |
| Peak Spout | Alignment Plane Tin Wave, Single Peak |
| Low oxidation design | In most cases: there is lead-zinc slag 2.0kg/8h, tin impurities
containing different tin slag about deviation |
| Crest Motor | Italian B&M high temperature motor wave height digital
adjustment |
| Heating element | Specially-made long-life, infrared heating tube, Taiwan Yangming
solid state relay, tin liquid heating are ± 2 °C |
| Refrigeration system (standard) | |
| Refrigeration method | Axial fan natural air cooling |
| PCB transfer system | |
| High-strength wear guide | Kai Lida special aluminum rails use high-temperature
wear-resistant, stainless steel rail special thermal compensation
anti-deformation telescopic structure to ensure that the rail does
not deform can not afford to lose board |
| Guide rail parallelism | 0.5mm |
| Widening | Manually widen |
| Transfer with double hook titanium claw | Kai Lida Dedicated Double Hook Titanium Claw Splint Clamp 2.5mm |
| C/V speed setting minimum unit range | The minimum unit 1mm/min 0-1800mm/min |
| C/V speed deviation range | Electronic closed-loop control within 0-10mm/min |
| Chain tensioner | Sprocket adjustment tension |
| Transport motor | Taiwan STK three-phase inverter 60W motor |
| Body structure | |
| Body structure | Streamlined body frame structure, streamlined design, beautiful and
durable |
| Front and rear door structure | All closed structure, maximum maintenance space |
| Frame size | L1800×W1100×H1600MM |
| Dimensions | L2500×W1100×H1600MM |
| Electrical and control performance | |
| control method | Relay + PLC Japan Mitsubishi |
| Control interface | Human-machine button operation interface is simple and convenient |
| Abnormal alarm method content | Temperature too high or too low alarm |
| Temperature control protection system | Stop heating when preheating or solder pot fails |
| Service system | |
| Warranty time | 2 years of all customers of Kelita |
| Out of warranty | Paid service. Parts are charged at the purchase price by 1.2 |
| After-sales service response time | Within 4 hours in Shenzhen, the factory arrives in Guangzhou,
Zhuhai, Dongguan, Huizhou arrives within 8 hours, and other areas
and provincial capitals reach the factory in 24 hours (first
flight) |
| Key Accessories Models and Brands | |
| PLC | Mitsubishi FX Series |
| Transport motor, tooth box | Taiwan STK three-phase 60W tooth box 1:100K |
| Titanium claw | Kai Lida titanium alloy special claws, thickness 1.5MM |
| Tin furnace motor | Three-phase 6-pole 0.18kw high temperature Italian B&M |
| Rodless cylinder | Japan SMC |
| Pneumatic Components | Genuine Yadek |
| Temperature control instrument | Japan RKC48*48MM |
| Intermediate relay | OMRON MY2 MY4 |
| Inverter | Taiwan Delta 0.4kw |
