High Precision Led Bulb Pcb Board , LED Electronic Circuit Board 1 Year Warranty

CNSMT Electronic printed circuit board fast delivery led smd pcb board Low Price sample

Quick Detail

Feature

Application

Setting skills
Different points need to be set in different stages of design, and large grid points can be used for device layout in the layout stage.
For ICs, non-positioning connectors, and other large devices, 50- to 100-mil lattice points can be used for layout. For passive small devices such as resistors, capacitors, and inductors, 25 mil grids can be used for layout. The accuracy of the large grids facilitates the alignment of the devices and the aesthetics of the layout.
PCB layout rules:
1. Under normal circumstances, all components should be placed on the same surface of the circuit board. Only when the top layer components are too dense, can some devices with limited height and low heat, such as chip resistor, chip capacitor, and paste Chip ICs are placed on the bottom layer.
2. Under the premise of guaranteeing electrical performance, components should be placed on the grid and arranged parallel or perpendicular to each other, in order to be neat and beautiful. Under normal circumstances, no overlap of components is allowed; the arrangement of components should be compact, and the components should be arranged on the whole surface of the grid. Uniform distribution, density and consistency.
3. The minimum spacing between adjacent pad patterns of different components on the circuit board should be above 1MM.
4, from the edge of the circuit board is generally not less than 2MM. The best shape of the circuit board is a rectangle, the aspect ratio is 3:2 or 4:3. When the circuit board is more than 200MM by 150MM, you should consider the circuit board can withstand Mechanical strength.

Layout skills
In the layout design of the PCB, it is necessary to analyze the elements of the circuit board. According to the function layout design, when the layout of all components of the circuit, it is necessary to comply with the following principles:
1. Arrange the positions of each functional circuit unit according to the circuit's flow, so that the layout is convenient for signal circulation and the signal is kept in the same direction as possible.
2. Focus on the core components of each functional unit and lay out around him. The components should be evenly, integrally, and compactly arranged on the PCB to minimize and shorten the leads and connections between the components.
3, in the work of high-frequency circuits, to consider the distribution parameters between components. The general circuit should arrange parallel components as much as possible, which is not only beautiful, but also easy to install welding, easy mass production.

CNSMT  was established in June 2005

with a registered capital of 6 million yuan and more than 60 employees.

The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
CNSMT mainly develops and sells SMT pick and place machines, printing presses, reflow welding, wave solder machine, loader and unloader, conveyor, AOI, SPI, and peripheral auxiliary equipment.

The company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.

The sales volume of products reached more than 200 units in half a year.
Our philosophy: integrity, strength first, wholeheartedly for the customer.

Our company adhering to the customer first, service-oriented business philosophy,

benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.