Radial Auto Insertion Machine china brand Radila and Axial AI led
insert equipment
Quick Detail
we supply all brand insert machine
Universal and panasonic brand avk3 rh2 ...
| Theoretical velocity | 18000 / h (software system upgrade can be speeded up) |
| Insertion loss rate | Less than 300PPM |
| Insertion direction | The 0-360 degree increment is 1 degrees. |
| Lead span | Double spaced 2.5mm/5.0mm/7.5mm or 3.5mm |
| Substrate size | Minimum 50mm * 50mm, maximum 450mm x 450mm |
| Substrate thickness | 0.79-2.36mm |
| Component specification | The maximum height is 23mm, the maximum diameter is 10mm, and the
maximum pin diameter is 0.8mm. |
| Component species | Capacitors, transistors, triode, LED lights, button switches,
resistance, connectors, coils, potentiometers, fuse seats, fuse
wire and other vertical tape packaging materials. |
| Length of shear foot of element lead | 1.5 + 0.3mm (short leg knife), 2 + 0.3mm (long sword). |
| Angle of elbow of element lead | 10-35 degree (adjustable) |
| Number of material stations | The 60 stop (the number of push to use stations) is optional
(10-100 stations). |
| Machine size (long * width * high) | Host size 1800mm x 1600mm x 2000mm |
| Material station size | 500mm x 600mm x 760m |
| Machine weight | 2000KG (40 station) |
| Use power | 220V, AC (single phase) 50/60HZ, 2.0KVA/1.8KW (energy saving) |
| System protection | Uninterrupted power supply (UPS) configuration can run for 15
minutes after power failure. |
| Use power | 1.6KW (energy saving type) |
| Use of air pressure | 0.6--0.8MPA |
| Gas consumption | 0.3 cubic / minute |
| Use of ambient temperature | 5-25 degrees |
| Machine noise | 65 decibels |
| Hole position correction method | Machine vision system, multi point MARK visual correction. |
| driving system | AC servo, AC motor |
| Data input mode | USB interface input (EXCEL document format) |
| Control system | Chinese operation interface (WINDOWS system control platform) LCD
monitor |
| Component density | The 1mm distance between the components and the distance between
the patch element and the hole can not be less than 3mm |
| Worktable operation mode | Clockwise and counterclockwise direction |
| Transmission mode of PCB | Manual / automatic optional |
Feature
| Product Name: | smt Auto Insertion Machine |
| Used for: | smt assembly full line |
| Warranty: | 1 Year |
| Shipment | by air |
| Delivery Time: | 1-2Days |
| Our Main Market | Whole of the world |
Packaging details:foam and carton
Delivery time:Within 1~3 working days
Shipment
1. We ship to world wide
2. Most orders ship within 1~7days after payment
3. Item shipped from china mainland using airmail by EMS, UPS, DHL,
TNT or Hong Kong post, we accept the customer’s shipping request
4.100%T/T before shipment, after we shipped the goods, we will
email you the shipping information
5.WE sell and buy used equipment long-term
Conditional requirements
Requirements for environment: temperature: 15 ~ 35 C, humidity: not
greater than 75%RH.
Requirements for compressed air: pressure 90PSI, flow rate 2.75,
air quality: clean and dry.
Demand for electricity: AC:200/230V 6.25A 50/60HZ.
Automatic vertical plug-in
Automatic vertical plug-in
Requirements for working PCB board:
1, size: 100 * 80mm ~ 480 * 400mm thickness =0.8 ~ 2.36mm.
2, there is a positioning hole parallel to the horizontal axis of
the machine worktable.
3. The silk screen is clear with the hole position.
Operation method
1, tooling cuffs require beam ends, work shoes must be skid
resistant, and high heels can not be worn.
2, when working on the machine back stack, you must press the STOP
key to make it light.
3, women workers require wearing headscarves, long hair to hang up,
male workers are not allowed to wear ties, to prevent entry into
the machine at work.
4, machine single operation, strictly prohibit many people at the
same time operation.
5, work in the hands of the board, the lower board, in the machine
internal repair components to use pliers or tweezers (axial
components), hands well, hand out of the plug-in area, and then
operate the control panel.
6, before starting the machine, remove all tools and debris on the
machine table.
Special-shaped component plug-in
Special-shaped component plug-in
7, do not put anything on the worktable in order to avoid damaging
the machine.
8, in the work, if the machine suddenly stops because of unknown
reasons, it must not extend to the head of the plug.
9. When a plug-in error occurs in normal production, you must not
extend your hand to the plugin head.
10, for automatic upper and lower plate machine, the machine is
normal production, prohibit to extend the hand into the bridge.
11. Understand the mesa movement area of the machine without
collision.
