Open desktop vertical laminar flow clean workstation for cosmetics
industry
1. Laminar flow clean bench description:
Product Information:
The laminar flow clean bench is an air purification device that
provides a local dust-free and sterile working environment, and can
artificially control and discharge the air that has been
contaminated in the work area through a special filter channel to
avoid harm to people and the environment. This kind of safe
microbiological special clean bench is widely used in biological
laboratories, medical and health, bio-pharmaceuticals and other
related fields, and it has a good effect on improving the process
conditions, protecting the operator's health, improving product
quality and yield.
Structural Features:
1).Adopts mini-pleated HEPA filter to minimize the plenum, with
stainless steel table-board and glass atside make the whole work
area spacious and bright;
2).Easy removal prefilter with big air volume for better protection
of HEPA filter and ensure the wind speed;
3) , adjustable air flow systems to make work area in ideal status;
4) , Vertical flow type, open desktop, easy to operate.
Performance Features:
● Provide an operating environment with a cleanliness level of 100.
For dust particles with a particle size ≥ 0.5 μm ≤ 3.5
particles/liter
● Horizontal laminar flow type or vertical laminar flow type
● Ultra-thin high efficiency air filter without partitions, small
footprint
● With touch-type electronic control panel, the fan air flow can be
adjusted steplessly to ensure that the wind speed in the work area
is always in an ideal state.
● Stainless steel worktable, plexiglass enclosure, can be equipped
with UV remote control electrical interface
2.Class 100 laminar flow clean workstation supplier in
Guangdong,China
| Place of Origin: | Guangdong China (Mainland) | Brand Name: | YN | Model Number: | YN-VC-1300 |
| After-sales Service Provided: | Engineers available to service machinery overseas | External Size: | 1300x750x1800 mm | Working Area: | 1140x700x700mm |
| Purifying Class: | 100 class | Air Flow: | 400-650 | Average Flow: | 0.25-0.45 |
| Efficiency: | 99.99% | Rate of work: | 150 | Noise: | <=65 |
| LED: | 9x1 | Power supply: | 220V 50 HZ | |
|
3. Clean bench use management:
(1.) Each time the clean bench is used, the experimenter should
first turn on the UV lamp of the clean bench and use it after 20
minutes of ultraviolet irradiation.
(2.) Turn on the power supply of the clean bench, turn off the UV
lamp, and wipe the disinfection table with 75% alcohol or 0.5%
peracetic acid spray
(3.) During the entire experiment, the experimenter should follow
the aseptic procedures.
(4) After the experiment, wipe the work surface with disinfectant,
turn off the power, and turn on the UV lamp for 15 minutes.
(5.) In the event of a unit failure, the animal laboratories shall
be notified immediately, and the professionals shall continue to
use them after passing inspection.
(6.) The experimenter should pay attention to keeping the room
tidy.
(7.) The filter material of the clean bench shall be replaced every
2 years, and replacement records shall be made.
Production detail photos
Our company infomation:
