Special Patterns Perforated Aluminum Sheet For Decoration /
Construction
Quick details of perforated aluminum sheet alloy:
| Aluminum perforatation rate | Specially designed according to drawing |
| Raw material | Alloy aluminum 1/3xxx series |
| Item temper | O, H18, H24 |
| Hole shape | Specially customized |
| Thickness | 0.8-10mm or specially designed |
| Width and length | Customized |
Characteristics of alloy aluminum:
1. 1xxx series: more than 99% commercial-purity aluminium
characteristics---high conductivity, corrosion resistance and good
welding performance but low intensity.
2. 2xxx series: alloy of Al and Cu
characteristic---high intensity, favorable heat resistance and
processing performance.
3. 3xxx series: alloy of Al and Mn
characteristics--good corrosion resistance, welding performance and
high plasticity .
4. 4xxx series: alloy of Al and Si
characteristics--good abrasion ability and high temperature
resistance.
5. 5xxx series: alloy Al and Mg
characteristics--good corrosion resistance, welding performance and
can only raise the intensity through cold rolling.
6. 6xxx series: alloy of Al, Mg and Si
characteristics--good corrosion resistance and welding performance.
7. 7xxx series: alloy of Al and Zn
characteristics--super high intensity brings well tenacity to alloy
and it's easy for processing.
8. 8xxx series: alloy in reserve
characteristics--high plasticity and deep drawability.
| Round holes staggered pattern |
| Hole | Center | Gauge | Open area |
| Thick |
| .020" RD | .045" Stag | 26 | 18% |
| 1/32" RD | 1/16" Stag | 22 | 23% |
| 3/64" RD | 5/64" Stag | 24 | 33% |
| 3/64" RD | 3/32" Stag | 22 thru 18 | 23% |
| 1/16" RD | 3/32"Stag | 22 thru 16 | 40% |
| 1/16" RD | 7/64" Stag | 20 thru 16 | 30% |
| 1/16" RD | 1/8" Stag | 26 thru 16 | 23% |
| 5/64" RD | 1/8" Stag | 22 thru 14 | 35% |
| 3/32" RD | 5/32" Stag | 24 thru 14 | 33% |
| 3/32" RD | 3/16" Stag | 24 | 23% |
| .117 RD | 5/32" Stag | 18 | 51% |
| 1/8" RD | 3/16" Stag | 24 thru 11 | 40% |
| 1/8" RD | 7/32" Stag | 14 thru 12 | 30% |
| 1/8" RD | 1/4" Stag | 14, 13 | 23% |
| 9/64" RD | 3/16" Stag | 18 | 51% |
| 5/32" RD | 3/16" Stag | 22 thru 16 | 63% |
| 5/32" RD | 1/4" Stag | 20 thru 10 | 35% |
| 3/16" RD | 7/32" Stag | 22 thru 16 | 67% |
| 3/16" RD | 1/4" Stag | 24 thru 12 | 51% |
| 3/16" RD | 5/16" Stag | 10, 3/16" | 33% |
| 3/16" RD | 3/8" Stag | 14 thru 10 | 23% |
| 1/4" RD | 5/16" Stag | 20 thru 16 | 58% |
| 1/4" RD | 3/8" Stag | 26 thru 1/4" | 40% |
| 17/64" RD | 5/16" Stag | 20 | 66% |
| 5/16"RD | 7/16" Stag | 20 thru 1/4" | 46% |
| 3/8" RD | 9/16" Stag | 20 thru 1/4" | 40% |
| 1/2" RD | 11/16" Stag | 20 thru 1/4" | 48% |
| 1/2" RD | 3/4" Stag | 16 | 40% |
| 5/8" RD | 7/8" Stag | 10 thru 1/4" | 46% |
| 3/4" RD | 1" Stag | 16 thru 1/4" | 51% |
| 1" RD | 1-3/8" Stag | 10 thru 1/4" | 48% |
| 1-1/4" RD | 1-5/8" Stag | 1/4" | 54% |
| 1-1/2" RD | 2" Stag | 1/4" | 51% |
| 2" RD | 2-1/2" Stag | 1/4" | 58% |
| 2-1/2" RD | 3" Stag | 3/16" | 63% |
| 3" RD | 3-1/2" Stag | 3/16" | 67% |
| 4" RD | 4-1/2" Stag | 10 | 72% |
