Speed Adjustable Automatic Car Park Barrier Fence Gate Barrier
System
Technical Data:
1 Working temperature(motor): -35℃~+85℃
2 Working temperature(control panel): -35℃~+85℃
3 Voltage:220V±10%,50HZ or 110V±10%,60HZ
4 Rated Power:80W,capacitor:9+uF/450W
5 Humidity:≤90%RH
6 Distance of remote control:100M＞L≥30M in the open place
Variable frequency controller product description
Barrier Gate controller -- variable frequency type, is the enhanced
barrier control which speed can be adjusted .Adopting full remote
control mode, with the open /stop/close wire control interface
,counting interface, special encoder limit interface, loop detector
interface, infrared interface, open limit,close limit output
interface, communication interface.The remote control code is the
learning code,and receiver module adopts external superheterodyne
reception.
Interchange Instruction for Arm directions
The product direction can be interchanged, divided into 6 steps.
Step 1: remove the M8X20 inner hexagonal screw,take out the machine
core;
Step 2: remove the electrical supporting plate from left side to
the right side;
Step 3: remove the M10*30 fixed screw on the boom tray (see figure
1);
Step 4: using the M14*150 screw to pull out the boom tray head(see
figure 2);
Step 5: install the boom tray head from the original left to the
right side,or the original right to the lest side;
Step 6: put the machine core back into machine case, fixed the
M8*20 hexagonal screw, direction interchange is completed, no need
to adjust other Settings.
Product Maintenance
1 Keep the barrier gate clean
2 Check the joints ever month in case of any loose parts.
3 Check the spring elasticity after the barrier gate running 3000
times.
4 Check the easily worn-out parts(like the spring,limit
switch),every half year and renew it.
5 Remote control distance will be shortened or not work in case
like big object screening,battery exhausting,extreme weathers.
Packing List
| Name | Specification | Qty | Unit | Note |
| Hexagon screw | M12*70 | 2 | Piece | Fixing the boom |
| Boom press board | | 1 | piece | |
| Mounting batten | | 2 | piece | Fixing the case |
| Expansion bolt | M16*150 | 4 | unit | Fixing the case |
| Case Key | | 2 | unit | |
| Remote controller | | 2 | unit | |
| Instruction | | 1 | piece | |
Product Maintenance
1 Keep the barrier gate clean
2 Check the joints ever month in case of any loose parts.
3 Check the spring elasticity after the barrier gate running 3000
times.
4 Check the easily worn-out parts(like the spring,limit
switch),every half year and renew it.
5 Remote control distance will be shortened or not work in case
like big object screening,battery exhausting,extreme weathers.
Analysis of the fault
| Item | Fault | Fault reason | Fault removal |
| 1 | The power indicator is not on. | 1. The power supply is not connected; 2. Fuse blown.
| 1. Connect the power supply; 2. Replace the fuse.
|
| 2 | The power indicator is on,but remote control have no reaction. | 1.Remote control is wrong; 2. Bad receiver module; 3. Interference from the same frequency.
|
1. Relearn the remote control; 2. Replace remote control receiver; 3.Replace other frequencies.
|
| 3 | The power button is on, the barrier indicator light is normal,but
the motor is not running. | 1. Open or wrong motor line; 2. Motor blocked
| 1. Connect the motor line; 2. Manually release the motor.
|
| 4 | Unable to up and down limit. | 1. Wrong encoder connections; 2. damaged encoder |
1. Check if encoder is installed correctly; 2. Replace the encoder.
|
| 5 | Remote control has no reaction. | 1. Insufficient battery power of the control; 2. Bad control. | 1. Replace the battery; 2. Replace the control. |
| 6 |
"E-0 1" appears on the display
| Overtime protection is running on the motor | 1. Check if the encoder is installed correctly. 2. Replace the encoder |
FAQ:
Q: Are you trading company or manufacturer ?
A: We are a professional barrier gate manufacturer.
Q: How long is your delivery time?
A: Generally it is 2-5 days if the goods are in stock. or it is 5-7
days if the goods are not in stock, it is according to quantity.
We can send it for you by DHL/Fedex/TNT/SEA/AIR or your
requirments.
Q: How about payment terms our company provide?
A: T/T or Western Union.
Q: Do you provide samples ?
A:No,we don't provide samples. The MOQ of our products is 1pc.
