Centrifugal Cast Heat-resistant Cobalt-based Special Alloy Parts for Furnaces EB13123

Centrifugal Cast Heat-resistant Cobart-based Special Alloy Parts for Furnaces EB13123

High Impact Value:≥HB150J;

Hardness:≤HB300；

Machined all ove.

The utilization of various middle-frequency induction furnaces with small capacities confers to the higher flexibility of production of special alloy castings and the minimum melting quantities and consequent prompt deliveries to our customers.

Supply corrosion protected on all machined faces.

Items suitably crated to avoid damage during transit & storage one item per crate.

Benefits of the centrifugal casting process

1.Solidification happens at up to 120 times the gravitational acceleration, and consequently yields a highly compressed structure.

2.The process is gravity and pressure independent.

3.Mechanical properties substantially better as compared to static casting (can be compared with forged parts)

4.The Directional solidification of the casting, yielding a very uniform structure, free from inclusions and blow holes.

5.Practically any material can be cast ranging from low-alloy to iron-free
materials, e.g. Cr-Ni-Mo.

Quality Level: As per National Standard & International Standards.

Sizes available: Dia.50mm--1500mm.

Application Field: Mining Industry, Valve and Pump Industry,Heat-treatment Industry, Metallurgical Industry, Cement Industry,Power plants, Oil, Gas Industry.

Material Grade:

ASTM	Alloy	C	Cr	Ni	Other	Description
30/50 W	22H®	0.45	30	50	W 4	The alloy is wholly austenitic and is intended for use at elevated temperatures up to 2200° F (1204° C).
HP+W	MO-RE®1	0.45	25	35	W 1.5	Tungsten addition increases creep strength. Useful to 2000°/2100° F (1093°/1149°C). MO-RE® 1 is a good option for use in severe high temperature furnace roll and radiant tube applications.
28/48 W+Co	Super 22H®	0.45	28	48	W 5 Co 3	Alloy of choice for extreme high temperature service to 2200° F (1066° to 1200° C).
	MO-RE®2	0.2	33	50	W 17+Al	Exceptional strength and oxidation resistance to 2400° F (1315° C).
HP Nb LC	MO-RE®9	0.09	25	35	Nb 1	MO-RE ® 9 is used primarily for parts located outside of furnace such as transfer lines and headers. It is designed for applications which require high ductility after aging.
A608	MO-RE ®10	0.4	25	35	Nb 1.2	MO-RE ®10 is a fully austenitic alloy with controlled additions of columbium (niobium) for ethylene pyrolysis tubing. It has improved high temperature strength and resistance to carburization and oxidation up to 2000° F (1093° C).
HP+Nb+MA	MO-RE ®10 MA	0.45	25	35	Nb 1.2 Ti Rare Earths	MO-RE ®10 MA is microalloyed with additions of columbium (niobium), zirconium and titanium for improved high temperature strength and resistance to carburization and oxidation up to 1975 °F (1079 °C). Microalloying produces fine, stable carbides which retard dislocation movement, thereby increasing elevated temperature strength and creep resistance. Intended for ethylene pyrolysis applications.
A297 A351	MO-RE ®21	0.1	20	32	Nb 1.2	Low carbon, columbium strengthened alloy with excellent thermal fatigue / thermal shock resistance. MO-RE 21 is a cast alternative to wrought alloy 800HT.
	MO-RE ®35 MA	0.45	28	36	Al, Rare Earths	MO-RE ® 35 MA is a fully austenitic heat resistant alloy developed by Duraloy primarily for plate heat treating furnace roll applications. MO-RE ®35 MA is microalloyed with additions of aluminum, titanium and proprietary rare earth additions for improved creep strength at furnace operating temperatures. Microalloying produces fine, stable carbides which retard dislocation movement, thereby increasing elevated temperature strength and creep resistance. Primarily intended for use in plate furnace rolls.
35/45 Nb+MA	MO-RE® 40 MA	0.45	34	45	Nb 1 Ti Rare Earths	MO-RE ®40MA has exceptional resistance to carburization and oxidation up to 2100 °F (1149 °C).
	MO-RE ®49	0.4	23	5		MO-RE ®49 is an iron-chromium-nickel heat resistant alloy developed for aerospace tooling.
	MO-RE® 2150					These Cr-Ni-W alloys are produced to unique chemistries for each customer to work in their dry tunnel furnace roll application.
A1002	Nickel Aluminide					R&D 100 Award Winner Nickel-Aluminum alloy, developed and patented by Oak Ridge National Laboratory and licensed to Duraloy. Alloy shows exceptional resistance to creep at elevated temperatures. Also shows strong resistance to carburization in service. Excellent selection for plate hardening furnace rolls.
	SUPERTHERM®	0.45	25	35	Co 15 W 5	Supertherm exhibits excellent oxidation resistance & high temperature strength to 2300° F (1260 °C). Supertherm is an excellent alloy for use in high temperature press platens or other applications where high temperature strength is critical.
	TMA®4505	0.3	20	25	W, Nb additons	TMA ®4505 is a heat resistant alloy developed by Duraloy for SuperPlastic and Hot Press tooling applications. It is a modification of ASTM A297 Grade HN with improved properties.
HK-40+MA	TMA®4700	0.4	25	20	W, Nb & Ti additions	TMA®4700 is an iron-chromium-nickel (modified HK type) heat resistant alloy. TMA ®4700 is microalloyed with additions of columbium (niobium), tungsten, titanium and rare earths for superior stress rupture properties to 2000°F (1093°C). Microalloying produces fine, stable carbides which retard dislocation movement, thereby increasing elevated temperature strength and creep resistance.
	TMA®4701					R&D 100 Award Winner heat resistant alloy developed by Duraloy. TMA®-nickel (modified HK type). TMA® 4701 has a proprietary, microalloyed, computer designed chemistry which gives the alloy better high temperature creep properties than similar alloys. It is intended primarily for reforming applications.
HP+Nb+MA (LoSil)	TMA®6300	0.4	25	35	Nb 1.2 Ti Rare Earths	TMA® 6300 is a fully austenitic heat resistant alloy. TMA®6300 is microalloyed with additions of columbium (niobium), titanium and rare earths for improved high temperature strength and resistance to carburization and oxidation up to 1950 ° F (1066 ° C). Microalloying produces fine, stable carbides which retard dislocation movement, thereby increasing elevated temperature strength and creep resistance. Intended primarily for reforming applications.
HP+Nb+MA (LoSil)	TMA® 6301		25	35	Nb 1.2 Ti Rare Earths	R&D 100 Award Winner heat resistant alloy developed by Duraloy. TMA ®6301has a proprietary, microalloyed, computer designed chemistry which gives the alloy better high temperature creep properties than similar alloys. It is intended primarily for reforming applications.

Production Flow Chart

Step 1: Getting orders.

Step 2: Process design by technical department

Step 3: Purchase of raw materials and pattern making &checking

Step 4: Inspection of raw materials

Step 5: Melting by middle-frequency induction furnaces

Step 6: Ladle analysis by Spectrometer

Step 7: De-oxidization, slag-removal, tapping

Step 8: Pouring

Step 9: Openning & fettling

Step 10: Surface & dimensional check

Step 11: Heat treatment

Step 12: Inspection of physical property (UT test,MT test, hardness,impact value, matrix structure)

Step 13: Packing

Step 14: Shipping

1. 18-year Foundry Operation Experience.

2. Friendly & High Efficient Technical & Commercial Communication.

3. Professional Export Practices: Have Exported to +60 Overseas Countries.

Our Trade Show

Our booth No. 14-A29-5 in Newcast 2015,Germany

Hall 14, Stand No.A29-5.

Contact Us for further information about products & service:

Mr.John Liu

Sales Manager

Tel: 0086-188 0059 6372

Fax: 0086-510-6879 2172

E-mail:cast@ebcastings.com; ebcastings@163.com

Skype ID:julia.zhu26

QQ: 183 9854 028

http://www.ebcastings.com

Eternal Bliss Alloy Casting & Forging Co.,LTD.

Add.: J-Sci-Tech Park, Binhu District,Wuxi,214122, Jiangsu,China

Our Inspection Video:

https://www.youtube.com/watch?v=7PuyYiJywyo

EB China makes metal better.

EB China is a professional manufacturer of high alloy castings and forgings with 22-year history!!Our main products include corrosion, wear & heat-resistant castings & forgings.

Our foundry & forging plant have passed ISO9001,ISO14001,ISO45001 Management System Certification and one whole set of inspection report will be submitted for your approval before shipment.

The registered capital of EB China is CNY13.14 million.

Three shops on Alibaba.TUV and SGS come to us to do onsite assessment every year.

Total online revenue is more than USD6 million.

32 Techncial Patents.EB China has achieved GB/T 29490-2013 Interllectual Property Management System Certification.

5 Trade Marks

We EB China have become Jiangsu Province High New Technologicl Enterprise.

Our high alloy castings & forgings have been exported to over 169 overseas countries.

We can supply high efficient service:

We can provide 24-hour service hotline: 0086-130 930 23772(what's app)

We are the director member of Wuxi E-commerce Chamber and the Vice President of Wuxi Lianyungang Commerce Chamber.

Our mission is LET'S CAST THE SOUL INTO OUR PARTS TO ACHIEVE THE BEAUTY OF INDUSTRY.

We sincerely hope that we can use our metallurgical and material expertise to be at your service.

My dear friend, if you need any high alloy castings and forgings, please surely send us your inquiry to cast@ebcastings.com! Thank you.