Aluminium Removable Wall Restaurant Movable Room Partition
Description:
Our movable and operable partition system accessories are custom
for each client and project,and they are also made of superior
material.Track system for right-angled configurations with cross-
roller carriers for element weights up to 500 kg. Support rollers
in the junctions guarantee easy operation when sliding the elements
across intersections .
Besides the high sound absorbing test,we have passed the
Eco-protection test and Fireproof test,to ensure you to get the top
quality product, and enjoy a safe , comfortable and low carbon
emission way of life on movable and operable partition system.
Technical information:
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 18000 mm |
| Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
| Face material | 9 mm | 9 mm | 12 mm |
| Pass doors | Single door or Double door |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Feature:
Our movable partition utilises up to date materials and
manufacturing methods and can attain much higher levels of sound
attenuation than was previously achievable with a folding
partition. The sliding wall is extremely easy to use and
incorporates important features such as integral pass door and a
flush appearance when closed.
It is available as a ceiling track hung system with our without
floor location pins, or as a floor mounted system supported on an
ultra low profile floor track that can be installed flush with the
floor covering. The floor mounted system utilities a ceiling guide
track that can accommodate an adjustment tolerance of 22.5 mm. both
systems are aviable as center or end tracking.
The system has a unique closing device, which helps the operator
achieve a flush wall in one easy movement before closing the end
pass door panel. This is particularly convenient when using a
ceiling hung partition without floor guides.
Operation:
When moving a wall panel there is a 22.5-25 mm gap between the top
of the panel and the underside of the head track, there is a
similar gap between the bottom of the panel and the floor.
Once a panel is positioned, acoustic integrity is maintained along
the top and bottom of the panel by extending pressure seals.
The pressure seals are extended and retracted by a single 180°turn
of a removable operating handle.
Final closure of the wall is achieved by extending a telescopic
sleeve on the last panel. This action simultaneously extends the
top and bottom seals.
Installation details:
1. Before the renovation, the on-site measurement must be
performed. According to the measurement data and the construction
structure of the site, the design drawings shall be issued by the
construction party, and the two parties shall confirm to enter the
next step without any doubt.
2. Partition production is usually completed by a design company in
its own factory. The installation engineering part is produced on
site. Therefore, after confirming the design drawings, the
requirements for glass thickness, materials, hardware accessories,
and borders shall be analyzed and explained.
3. Pay attention to the strong and weak power engineering during
construction, because he not only concerns the installation and
wiring of the company's supporting facilities in the future, so he
must find a professional qualified cabling company, and have
professional and technical personnel to carefully measure the
construction site, and then All the drawings on the drawings show
the status of reserved switches, sockets, and the direction of
various lines.
