Battery powered transfer cheap mini diaphragm 12 volt dc vacuum
pump
how to choose pump?
In short, the gas sampling pump can only carry a small load (i.e.,
the pump suction end’s resistance can not be too big, but the price
is cheap; in the strict sense, the miniature vacuum pump can carry
a large load (the suction end allows large resistance, or even
completely clogged up, but the price is slightly higher. The
resistance of the pump can be measured by means of instrument.
Comparing it with the por of maximum allowable resistance of air
inlet in the pump's technical parameter, we can know whether the
type selection is appropriate or not. It is usually determined by a
simple method based on experience. For example, the following
conditions are of high load (that is, the pumping end of the pump
has greater resistance and can only be selected within the scope of
the miniature vacuum pump):
1.At the pumping end of the pump to be connected to a very long
pipe, or pipe bending points, severe bending will even block
closed, or the pipe has a very small hole (for example, less than φ
2 mm);
2.There are throttle valves, solenoid valves, air path switches,
filters and other components on the pipeline;
3.The pump outlet is connected with the closed container, or the
container is not airtight but the air intake is small;
4.The pump outlet is connected with the closed container, or the
container is not airtight but the air intake is small;
5.The pumping end of the pump is connected to the filter container,
which is used to speed up liquid filtration.
12 volt dc vacuum pump's parameter and features
1. Small and powerful
2. Extreme chemical resistance
3. Brush and brush-less direct current motor for selection
4. Dry running, durable and maintenance free
5. Self-priming and excellent for pressure
6. Low noise, longer endurance lifetime than other normal membrane
pump
Model | D312-1204-3700 |
Size(mm) | 32.8*50*70 |
Voltage(V/DC) | 6V/9V/12V/24V |
Power(W) | 5 |
Free Flow(L/M) | 4 |
Pressure(Kpa) | 120 |
Vacuum(Kpa) | -55 |
Weight | 160 |
Remark: Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
12 volt dc vacuum pump's dimension
Unlabeled tolerance is ± 0.1mm.
Pump Size:32.8*50*70mm
Pump Weight:160g;
Outlet:OD 5.8mm, silicone hose suggestion:ID 4.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is
stable and high.
The membrane is made by EPDM and pump's body is made by special
PC/PPS which make pump well endurance and strong chemical
resistance.
environmental testing requirements about 12 volt dc vacuum pump
| Number | Item | Test conditions and requirements | Remarks |
| 1 | Steady-state heat and wet | 60%rh | High humidity can affect the electrical performance of the motor |
| 2 | Temperature Shock | The pump was placed at -20 ℃ environment ,after 1h immediately
placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After
50 cycles was returned to room temperature.0.5h later,pumping power
test is conducted. The pump should be able to work properly;
fasteners should not loose , in working condition pump’s body
should not be leakage when block pump’s outlet. | too high temperature affect pump’s parameters, life and electrical
performance |
| 3 | High temperature test | Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After
0.5hours later, at room temperature power pump. Fastening points
should be no loose. The pump can work normally. Its performance and
parameters can not change. | |
| 4 | Low temperature test | For 72 hours,pump is at -20 ℃ environment. Then take it out. Power
the pump and test it.( when testing the pump,pump’s body can not
have ice ). Fastening points should be no loose. The pump can work
normally. Its performance and parameters can not change. | In too low temperature,motor cannot be started |
Electrical Performance about 12 volt dc vacuum pump
| Number | Item | requirements |
| 1 | Insulation resistance
| 10MΩ / between wire and frame measurements , 500VDC / min
|
| 2 | Dielectric strength | 5mA Max/between wire and frame measurements 500 VAC/min |
Special requirements for materials about 12 volt dc vacuum pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully
extinguish within 30
seconds under 10 seconds of ignition test.
12 volt dc vacuum pump's production process
Our company has a complete production system.
We has our own mold department, injection molding department,
production and
assembly department, sample room, R & D department, sales
department.
We can independently design and produce pump.
In addition, we can assemble productions in strict accordance with
the ISO9001 system.
12 volt dc vacuum pump's application
Our products can meet the specific needs of different clients. The
products are mainly used in medical cosmetology, household
electronic appliances, food and beverage,
health,instrument,chemical instrumentation. The car and laboratory
and other industries. The products are mainly exported to korea,
Japan,southeast Asia, Australia, Europe and other countries.
12 volt dc vacuum pump's packing and shipping
Packaging:
CTN/PCS: 75PCS
G.W. : 12 KG
DIMENSION : 47 * 31 * 25 CM
We can ship pumps to you by sea, by air or by express.
By sea: cheap but long
By air: quick but a a little expensive
By express: door to door, 3-5days to your country by
DHL/UPS/FEDEX/TNT and others.
The fastest, but most expensive.
You can choose according to your needs.
Our company offers multiple component configurations allowing
piston pump to be used for either vacuum operation, pressure
operation, or alternating vacuum and pressure operations.The
innovative, compact design incorporates leading edge technologies
that allow it to operate harder, quieter and longer, reliable,
highly efficient.
Its flow can deliver up to 3 L/min and 8L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Company Information
The company consists of a professional design department, mold
department, injection department , assembling workshop.
All products of the company have independent intellectual property
rights and patents. We can independently design and produce. In
addition, we can assemble productions in strict accordance with the
ISO9001-2015 system. The company has passed ISO9001 certification.
"Feiyinsi" is a registered trademark of our company .Based on the
soul purpose "we are implementing the principle of “quality and
service is the first” all the time, taking the highest industry
standard to control every procedure.
Certifications
All products of our company have independent intellectual property
rights and patents.
We have all kinds of certification, such as Rohs,CE and Reach.
RFQ
Q1: Can I have a sample order for it?
A: Warmly welcome of sample order to test and check quality. Mixed
samples are acceptable.
Q2: What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks, if
bulk qty need about 20-25workdays.
Q3: How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping also optional.
Q4: How to proceed an order?
Firstly let us know your requirements or application.
Secondly We quote according to your requirements /our recommend
model with suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q5: What's your payment terms?
A: T/T & L/C, small amount accept paypal. Big amount ok for 30%
down payment & balance against copy bill of loading.For more need,
please just contact us and we will reply within 24hours on working
days.
Q6. Is it OK to print my logo on this product?
A: Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 6-12 months warranty to our products & 1% wear out
parts for after service.
Q8: What’s your main marker?
A: North America, Korea & European
Q9: Do you have ability to do ODM service?
A1: Warmly welcome your ODM requirement based on our production
line and our R&D team with more than 16 years experience on
pump& motors.
A2: ODM service based on offered sample. B:Oo modify & creative new
function based on our product series.
Q10. Do you have any MOQ limit for led light order?
A. No MOQ, 1pc for sample checking is available.
