170kpa pressure 5L/M flow electric dc diaphragm mini 12v brushless
pump
DC brushless pump, simply,its function is to use the DC brushless
motor as the power to pump the air out from the container, or
directly pump air into the atmosphere. DC brushless pump, because
of DC brushless motor, it has long life and often be used in
conditions which need a long time continuous working . For example,
on-line gas extraction,gas pumping, gas circulation, and so on.
Because of its small size, light weight, also called a micro
brushless DC vacuum pump, micro brushless DC pump, brushless motor
vacuum pump, speed regulating vacuum pump, gas sampling pump, long
life vacuum pump.
Why we choose brushless pumps?
Low noise
Long lifetime
Highest performance
Extreme chemical resistance
Uncontaminated flow
High level of gas tightness
Optimal solution for your application
mini 12v brushless pump's parameter
Our company offers multiple component configurations allowing pump
to be used for either vacuum operation, pressure operation, or
alternating vacuum and pressure operations.The innovative, compact
design incorporates leading edge technologies that allow it to
operate harder, quieter and longer, reliable, highly efficient.
Its flow can deliver up to 3 L/min and 11L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Model | DW512-1704-2900 |
Size(mm) | 82*38*62 |
Voltage(V/DC) | 6V/9V/12V/24V |
Power(W) | 4 |
Free Flow(L/M) | 5 |
Pressure(Kpa) | 170 |
Vacuum(Kpa) | -65 |
Weight | 280 |
mini 12v brushless pump's photo
An elastomeric diaphragm can be used as a versatile dynamic seal
that removes many of the limitations found with other sealing
methods. They do not leak, offer little friction, and can be
constructed for low pressure sensitivity. With the right material
consideration, diaphragms can seal over a wide range of pressures
and temperatures without needing lubrication or maintenance.
Electrical Performance about mini 12v brushless pump
| Number | Item | requirements |
| 1 | Insulation resistance
| 10MΩ / between wire and frame measurements , 500VDC / min
|
| 2 | Dielectric strength | 5mA Max/between wire and frame measurements 500 VAC/min
|
Environmental Requirements about mini 12v brushless pump
| Working Environment | Storage Environment
| Transportation Environment
|
Temperature Range
| -30℃~66℃ | -30℃~70℃ | -30℃~70℃/Smooth |
Relative humidity range
| 60%rh | 60%rh | 60%rh
|
Environmental testing requirements about mini 12v brushless pump
| Number | Item | Test conditions and requirements | Remarks |
| 1 | Steady-state heat and wet | 60%rh | High humidity can affect the electrical performance of the motor |
| 2 | Temperature Shock | The pump was placed at -20 ℃ environment ,after 1h immediately
placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After
50 cycles was returned to room temperature.0.5h later,pumping power
test is conducted. The pump should be able to work properly;
fasteners should not loose , in working condition pump’s body
should not be leakage when block pump’s outlet. | too high temperature affect pump’s parameters, life and electrical
performance |
| 3 | High temperature test | Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After
0.5hours later, at room temperature power pump. Fastening points
should be no loose. The pump can work normally. Its performance and
parameters can not change. | |
| 4 | Low temperature test | For 72 hours,pump is at -20 ℃ environment. Then take it out. Power
the pump and test it.( when testing the pump,pump’s body can not
have ice ). Fastening points should be no loose. The pump can work
normally. Its performance and parameters can not change. | In too low temperature,motor cannot be started
|
Special requirements for materials about mini 12v brushless pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully
extinguish within 30
seconds under 10 seconds of ignition test.
More details about mini 12v brushless pump
Working principle: the rotary motion of the motor turn into the
swing of connecting rod which makes the diaphragm up and down
motion. In the process of the downward movement of the diaphragm,
pump cavity will suck medium through the inlet valve; Upward
movement of the diaphragm, pump cavity press out media through the
outlet valve. Mechanical transmission parts and pump cavity is
isolated by diaphragm. Diaphragm pump does not need oil for
auxiliary lubricating, in the process of transmission, extraction
and compression of medium.
mini 12v brushless pump's application
Our products can meet the specific needs of different clients. The
products are mainly used in medical cosmetology, household
electronic appliances, food and beverage,
health,instrument,chemical instrumentation. The car and laboratory
and other industries. The products are mainly exported to korea,
Japan,southeast Asia, Australia, Europe and other countries.
mini 12v brushless pump's dimension
Unlabeled tolerance is ± 0.1mm.
Pump Size:82*38*62mm
Pump Weight:280g;
Outlet:OD 6.5mm, silicone hose suggestion:ID 5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is
stable and high.
The membrane is made by EPDM and pump's body is made by special
PC/PPS which make pump well endurance and strong chemical
resistance.
mini 12v brushless pump's packing and shipping
Packaging:
CTN/PCS: 60PCS
G.W. : 18 KG
DIMENSION : 47 * 31 * 25 CM
Picture’s about the packaging:
Shipment
1. We can ship by DHL, UPS, FedEx ,TNT, EMS, HONGKONG post etc.DHL,
UPS, FedEx, TNT takes about 3-5 workdays for delivery.
2. And we will help choose the most cost-effective way for you
according to your requirement.
3. The tracking number will be available the next day after
shipment,then you can check your goods is on the way.
Certifications
We have obtained the ISO9001 certification, and our products comply
with the EU RoHS Directive and REACH regulations, FDA
certification. Some of our products have WARS, NSF approval.
Today, Yanhua have 12 production lines and 300 skilled workers, our
monthly production capacity is 500,000pcs brushless and brush dc
pumps,100,000 piston pumps and 10,000 gear pump and water pump.
Our services
1. OEM / ODM welcome
2. Competitive advantage mini air pump, mini water pump, mini air
valve
3. No MOQ & small order & sample order welcomed
4. We will reply you for your inquiry in 24 hours.
5. After sending, we will track the products for you once every two
days, until you get the
products. When you got the goods, test them, and give me a
feedback.If you have any
questions about the problem, contact with us, we will offer the
solve way for you.
6. 24*7 After sale service
7. We accept Paypal & Trade Assurance
8. With us your money in safe,your business in safe.
