110kpa pressure 3L/M flow 12v dc motor low voltage brushl micro
pump
Advantages:
Compared with the large vacuum pump, it has the following
advantages: small size, low noise, low power consumption, easy
operation, easy to carry, no maintenance, 24 hours continuous
operation, and allows medium to be rich in water vapor. Most
importantly, because it is dry, oil free, no vacuum pump oil or
lubricating oil, it will not pollute the working medium, do not
interfere with the medium analysis and so on. And the price is much
cheaper.
12v micro pump's parameter and features
1. Small and powerful
2. Extreme chemical resistance
3. Brush and brush-less direct current motor for selection
4. Dry running, durable and maintenance free
5. Self-priming and excellent for pressure
6. Low noise, longer endurance lifetime than other normal membrane
pump
Model | Z312-504-3200 |
Size(mm) | 32.8*50*70 |
Voltage(V/DC) | 6V/9V/12V/24V |
Power(W) | 4 |
Free Flow(L/M) | 3 |
Pressure(Kpa) | 110 |
Vacuum(Kpa) | -55 |
Weight | 160 |
Remark: Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
environmental testing requirements about 12v micro pump
| Number | Item | Test conditions and requirements | Remarks |
| 1 | Steady-state heat and wet | 60%rh | High humidity can affect the electrical performance of the motor |
| 2 | Temperature Shock | The pump was placed at -20 ℃ environment ,after 1h immediately
placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After
50 cycles was returned to room temperature.0.5h later,pumping power
test is conducted. The pump should be able to work properly;
fasteners should not loose , in working condition pump’s body
should not be leakage when block pump’s outlet. | too high temperature affect pump’s parameters, life and electrical
performance |
| 3 | High temperature test | Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After
0.5hours later, at room temperature power pump. Fastening points
should be no loose. The pump can work normally. Its performance and
parameters can not change. | |
| 4 | Low temperature test | For 72 hours,pump is at -20 ℃ environment. Then take it out. Power
the pump and test it.( when testing the pump,pump’s body can not
have ice ). Fastening points should be no loose. The pump can work
normally. Its performance and parameters can not change. | In too low temperature,motor cannot be started |
Electrical Performance about 12v micro pump
| Number | Item | requirements |
| 1 | Insulation resistance
| 10MΩ / between wire and frame measurements , 500VDC / min
|
| 2 | Dielectric strength | 5mA Max/between wire and frame measurements 500 VAC/min
|
12v micro pump's dimension
Unlabeled tolerance is ± 0.1mm.
Pump Size:32.8*50*70mm
Pump Weight:160g;
Outlet:OD 5.8mm, silicone hose suggestion:ID 4.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is
stable and high.
The membrane is made by EPDM and pump's body is made by special
PC/PPS which make pump well endurance and strong chemical
resistance.
Special requirements for materials about 12v micro pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully
extinguish within 30
seconds under 10 seconds of ignition test.
12v micro pump's production process
Our company has a complete production system.
We has our own mold department, injection molding department,
production and
assembly department, sample room, R & D department, sales
department.
We can independently design and produce pump.
In addition, we can assemble productions in strict accordance with
the ISO9001 system.
12v micro pump's application
Our products can meet the specific needs of different clients. The
products are mainly used in medical cosmetology, household
electronic appliances, food and beverage,
health,instrument,chemical instrumentation. The car and laboratory
and other industries. The products are mainly exported to korea,
Japan,southeast Asia, Australia, Europe and other countries.
12v micro pump's packing and shipping
Packaging:
CTN/PCS: 75PCS
G.W. : 12 KG
DIMENSION : 47 * 31 * 25 CM
Shipment
1. We can ship by DHL, UPS, FedEx ,TNT, EMS, HONGKONG post etc.DHL,
UPS, FedEx, TNT takes about 3-5 workdays for delivery.
2. And we will help choose the most cost-effective way for you
according to your requirement.
3. The tracking number will be available the next day after
shipment,then you can check your goods is on the way.
12v micro pump's photo
Our company offers multiple component configurations allowing
piston pump to be used for either vacuum operation, pressure
operation, or alternating vacuum and pressure operations.The
innovative, compact design incorporates leading edge technologies
that allow it to operate harder, quieter and longer, reliable,
highly efficient.
Its flow can deliver up to 3 L/min and 8L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Company Information
We devote to 20% profit to R & D department, so we have more than
20 patent in research dc micro pump. Our engineers has over 15years
professional experience in dc micro pump.
All products of the company have independent intellectual property
rights and patents. We can independently design and produce.
Founded in 1999,yanhua Micro pump Technology company is the leading
and biggest manufacturer specializing in various DC micro pump and
fluid comprehensive solution in China.
Our sale engineers team have more than 16years customers’ service
customer and 15years overseas experience in customer service.
Certifications
All products of our company have independent intellectual property
rights and patents.
We have all kinds of certification, such as Rohs,CE and Reach.
RFQ
Q1: Can I have a sample order for it?
A: Warmly welcome of sample order to test and check quality. Mixed
samples are acceptable.
Q2: What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks, if
bulk qty need about 20-25workdays.
Q3: How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping also optional.
Q4: How to proceed an order?
Firstly let us know your requirements or application.
Secondly We quote according to your requirements /our recommend
model with suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q5: What's your payment terms?
A: T/T & L/C, small amount accept paypal. Big amount ok for 30%
down payment & balance against copy bill of loading.For more need,
please just contact us and we will reply within 24hours on working
days.
Q6. Is it OK to print my logo on this product?
A: Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 6-12 months warranty to our products & 1% wear out
parts for after service.
Q8: What’s your main marker?
A: North America, Korea & European
Q9: Do you have ability to do ODM service?
A1: Warmly welcome your ODM requirement based on our production
line and our R&D team with more than 16 years experience on
pump& motors.
A2: ODM service based on offered sample. B:Oo modify & creative new
function based on our product series.
Q10. Do you have any MOQ limit for led light order?
A. No MOQ, 1pc for sample checking is available.
