maintenance free diaphragm brushless air pump with 9v dc motor
brushless air pump 9v's parameter and features
Low noise
Long lifetime
Highest performance
Extreme chemical resistance
Uncontaminated flow
High level of gas tightness
Optimal solution for your application
Model | DXW509-2306-2900 |
Size(mm) | 102.4*70*40 |
Voltage(V/DC) | 6V/9V/12V/24V |
Power(W) | 4 |
Free Flow(L/M) | 10 |
Pressure(Kpa) | 230 |
Vacuum(Kpa) | -75 |
Weight | 300 |
Our company offers multiple component configurations allowing pump
to be used for either vacuum operation, pressure operation, or
alternating vacuum and pressure operations.The innovative, compact
design incorporates leading edge technologies that allow it to
operate harder, quieter and longer, reliable, highly efficient.
Its flow can deliver up to 3 L/min and 18L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Electrical Performance about brushless air pump 9v
| Number | Item | requirements |
| 1 | Insulation resistance
| 10MΩ / between wire and frame measurements , 500VDC / min
|
| 2 | Dielectric strength | 5mA Max/between wire and frame measurements 500 VAC/min |
environmental testing requirements about 12v brushless vacuum pump
| Number | Item | Test conditions and requirements | Remarks |
| 1 | Steady-state heat and wet | 60%rh | High humidity can affect the electrical performance of the motor |
| 2 | Temperature Shock | The pump was placed at -20 ℃ environment ,after 1h immediately
placed at + 70 ℃ ± 3 ℃ environment for 1h.This is for 1cycle. After
50 cycles was returned to room temperature.0.5h later,pumping power
test is conducted. The pump should be able to work properly;
fasteners should not loose , in working condition pump’s body
should not be leakage when block pump’s outlet. | too high temperature affect pump’s parameters, life and electrical
performance |
| 3 | High temperature test | Pump is at 70 ℃ ± 3 ℃ environment for 48h. Then take it out. After
0.5hours later, at room temperature power pump. Fastening points
should be no loose. The pump can work normally. Its performance and
parameters can not change. | |
| 4 | Low temperature test | For 72 hours,pump is at -20 ℃ environment. Then take it out. Power
the pump and test it.( when testing the pump,pump’s body can not
have ice ). Fastening points should be no loose. The pump can work
normally. Its performance and parameters can not change. | In too low temperature,motor cannot be started |
Environmental Requirements about brushless air pump 9v
| Working Environment | Storage Environment
| Transportation Environment
|
Temperature Range
| -30℃~66℃ | -30℃~70℃ | -30℃~70℃/Smooth |
Relative humidity range
| 60%rh | 60%rh | 60%rh |
Special requirements for materials about 12v brushless vacuum pump
All materials comply with environmental standards.
Motors comply with EMC.
pump material is nonflammable or any fire should be fully
extinguish within 30
seconds under 10 seconds of ignition test.
brushless air pump 9v's dimension
Unlabeled tolerance is ± 0.1mm.
Pump Size:102.4*70*40mm
Pump Weight:300g;
Outlet:OD 5mm, silicone hose suggestion:ID 3.5mm
Materials:pump body: PC/PPS, diaphragm: EPDM
Because we use imported ball bearing,the pump’s performance is
stable and high.
The membrane is made by EPDM and pump's body is made by special
PC/PPS which make pump well endurance and strong chemical
resistance.
More details about brushless air pump 9v
A diaphragm pump (also known as a Membrane pump) is a positive
displacement pump that uses a combination of the reciprocating
action of a rubber, thermoplastic or teflon diaphragm and suitable
valves on either side of the diaphragm (check valve, butterfly
valves, flap valves, or any other form of shut-off valves) to pump
a fluid.
brushless air pump 9v's photo
Working principle: the rotary motion of the motor turn into the
swing of connecting rod which makes the diaphragm up and down
motion. In the process of the downward movement of the diaphragm,
pump cavity will suck medium through the inlet valve; Upward
movement of the diaphragm, pump cavity press out media through the
outlet valve. Mechanical transmission parts and pump cavity is
isolated by diaphragm. Diaphragm pump does not need oil for
auxiliary lubricating, in the process of transmission, extraction
and compression of medium.
brushless air pump 9v's packing and shipping
Packaging:
CTN/PCS: 60PCS
G.W. : 19.5 KG
DIMENSION : 47 * 31 * 25 CM
Picture’s about the packaging
We can ship pumps to you by sea, by air or by express.
By sea: cheap but long
By air: quick but a a little expensive
By express: door to door, 3-5days to your country by
DHL/UPS/FEDEX/TNT and others.
The fastest, but most expensive.
You can choose according to your needs.
brushless air pump 9v's model code
According to above picture, you know how our model codes are
produced.
You can know our pump more clearly and choose the pump more easily.
Certifications
The factory long-term supply micro pumps to the large
manufacturers. The micro pump is widely used in home appliances,
electronics, cars, vacuum preservation, health care, robot
supporting, a variety of environmental monitoring instrumentation
and other fields. The working life of our products goes through a
variety of environmental testing. The customer's requirements with
our own unique technology and design can meet a variety of special
industries’ needs( such as high temperature, long life , anti-
electromagnetic interference , low noise , oil resistance and other
special requirements ) . The company's products are exported to
Europe, America , Asia, Taiwan and other places .
The company consists of a professional design department, mold
department, injection department , assembling workshop and sales
department.
Why choose us?
(1)Various pumps in no MOQ and competitive prices.
(2)Professional website platform and one-to-one online service.
(3)We are factory. And we have our own professional R&D
department. We accept the order if you want to customize products
or design the product.
(4)Fast delivery for normal order, for the bulk quantity, it
depends on your specific requirement.
(5)Products are all covered with warranty and insurance.
User Instructions
1. will not guarantee the products if the application of our
products are exceeded the limitation which is specified on this
specification.
2.In case of changes of the specification specified on this
document. A written notice is requested in advance.
3.there is any data or related documentation different from this
data sheet.This data sheet is the principle reference.
4.Please do not use it in the environment of corrosive gas or
liquid or any detrimental gas. 5.While the motor is in
operation,please do not lock the motor intentionally for a long
periods,since the continuous stoppage will result in overheat and
thus burnt out the motor.
