super mini water transfer utility suction water pump with low
pressure
Product Description
Our company offers multiple component configurations allowing
piston pump to be used for either vacuum operation, pressure
operation, or alternating vacuum and pressure operations.The
innovative, compact design incorporates leading edge technologies
that allow it to operate harder, quieter and longer, reliable,
highly efficient.
Its flow can deliver up to 60 ml/min and 310mL/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 3V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Reliability of suction water pump
It is decided by the consequences’ severity of micro pump failure ,
according to their own requirements. The average failure-free
continuous running time of high quality products is more than 1000
hours, and some of them are thousands of hours. It is especially
important to note that this parameter is measured under full load
and uninterrupted operation, and is the worst condition. If the
actual use is not full load or continuous operation, the life span
will be longer. About how longer it can run, it will depend on the
pump working condition. The performance is a test of the
manufacturer's technical strength. If just from the appearance of
the product, it can be seen, such as the use of special motors
rather than ordinary low-priced motor, heavier weight under same
size. In addition,according to the price of the product, it may
also know a little.
suction water pump's parameter and features
Model: S1312-302-8000
Size(mm): 46*18*32
Voltage:(V/DC) 3V/6V/9V/12V
No-load current:(mA) 130
Load current:(mA) 420
Free Flow:(L/M) 0.31
Lift(m): 2
Weight: 32
suction water pump's demension
Unlabeled tolerance is ± 0.1mm.
Our company offers multiple component configurations allowing
piston pump to be used for either vacuum operation, pressure
operation, or alternating vacuum and pressure operations.The
innovative, compact design incorporates leading edge technologies
that allow it to operate harder, quieter and longer, reliable,
highly efficient.
Its flow can deliver up to 60 ml/min and 310mL/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 3V.
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
suction water pump's details show
1. High temperature performance, good consistency
2. Oil resistance and easy installation
3. DC brush motor
4. Long life span, low heat.
5. Heavy duty work for 24 hours and Continuous operation
6. The key parts are imported
7. Can work for long hours
suction water pump's application
The pump can be used in wide range.
1. Electronic products,agriculture,finishing,light industry
products
2. Analytic-al instruments
3. Chemical and production engineering
4. Various ancillary equipment
suction water pump's packing and shipping
Shipment
1.We can ship by DHL, UPS, FedEx ,TNT, EMS, HONGKONG post etc.DHL,
UPS, FedEx, TNT takes about 3-5 workdays for delivery.
2.And we will help choose the most cost-effective way for you
according to your requirement.
3.The tracking number will be available the next day after
shipment,then you can check your goods is on the way.
suction water pump's picture
Company Information
The factory long-term supply micro pumps to the large
manufacturers. The micro pump is widely used in home appliances,
electronics, cars, vacuum preservation, health care, robot
supporting, a variety of environmental monitoring instrumentation
and other fields. The working life of our products goes through a
variety of environmental testing. The customer's requirements with
our own unique technology and design can meet a variety of special
industries’ needs( such as high temperature, long life , anti-
electromagnetic interference , low noise , oil resistance and other
special requirements ) . The company's products are exported to
Europe, America , Asia, Taiwan and other places .
RFQ
Q1: Are you a factory or trading company?
A1: We are a factory.
Q2: Can I get a sample? How long it will take to get a sample?
A2: Yes, you can order sample to test and check the quality.
For our usual sample, the sample lead time is about 3-5days.
If special sample, it will take a longer time for design and order
materials to do pumps.
All our samples are done by our engineers.
They can according to your needs customize pump for you.
Q3: How can I make the payment?
A3: Payment can be made through T/T, paypal or Western Union.
Q4: Is it OK to print our logo on Pump?
A4: Yes, we could do OEM and print your logo on Pump product.
Q5: What about the package ?
A5: Standard export carton.
Q6.: The use of products have?
A6:The pump can pump various strong acid, alkali and corrosive air
etc.
Q7: How product quality and service?
A7: Our pump have CE certificate, quality assured and provide
various personalized needs.
Q8: How to proceed an order for Mini Air Pump?
A8: (1) Checking /confirming all details information( include
requirement of pump product, payment terms, price,quantity, leading
time or others);
(2) Checking/confirming the sample's quality or satisfied result;
(3) Final checking/confirming the price/quantity/leading
time/payment terms for first trial order;
(4) We factory arrange the production after receiving the real pump
order.
