2000mpm High Speed Wire Drawing Machine , 55KW Copper Medium Wire Drawing Machine

HXE-17DS Intermediate copper wire drawing machine

I. Application

17DS Intermediate copper wire drawing machine is used to drawing copper wire from 2.6mm-3.5mm to 0.4mm-1.6mm.

II. Main Technical parameters

1. Usage: Bare copper wire drawing

2. Inlet diameter: 2.5mm-3.2mm

3. Outlet diameter: 0.4mm-1.6mm

4. Speed: 0.7 -0.4mm,2000-1400mpm; 1.0 -0.7mm, 1200-1000mpm, 1.6-1.0mm, 900-1000mpm

5. Die Nos.17 pieces/Max, 30mm-15mmT or 25mm-10mmT, the finished die 25mm-10mmT

6. Decrease section ratio of m/c:20%+15%

7. Frame: Iron cast

8. Capstans: Ceramic Tungsten, 4-tier unity

9. Capstan diameter: 250mm

10. Final capstan diameter: 250mm

11. Main motor: AC 3 phase 55KW, controlled by inverter independently.

12. Take up motor:AC 3phase 11kw, controlled by inverter independently.

13. Take up capacity: 250kg for diameter 500mm iron spool, Max. weight 500kg for 630mm spool.

14. Spool size: diameter500mm-630mm/Max (customize)

15. Traverse motor: 90W reversible motor control, transmission by timing belts

16. Transmission type: by precious gears

17. Reverse system: PID synchronous control spool

18. Detective device: air tension control

19. Brake: Disc brake

20. Capstan lubrication:full immersion

21. Lubrication capacity: 120L/min

22. Machine dimension(L*W*H): 2100*1022*995mm

III. Compositions of equipments

IV. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

V. Shipping & Installation

5-1.Shipping

There are two lifting rings on the drawing machine, four on then annealing machine.

5-2.Installation (See attached drawing)

According to the drawing, make the foundation.

When machine is in position, install bolts and adjust the center line.

When concrete is drying, adjust center line again and fix the bolts.

5-3.Adjust

Before adjusting, check and clean all parts.

VI. Working environment

6-1.Altitude less than 1000m.

6-2.Temperature: －10℃－40℃

6-3.Relative temperature less than 85% (25℃)

6-4.Power source 380V, 50Hz, can be customized

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.