PVC plastic pulverizing machine/milling machine,
PVC pulverizer
Applications
RE series Plastic pulverizing machine is a prefect machine for
processing and grinding thermoplastics material, such as PVC, PE,
PP, EVA, PLA, ABS etc, with high output and thin powder.
The RE series automatic plastic milling machine is disc-type
plastic grinding mill series, which has the advantages of
high-yield and low-power.
Characteristics
1).With water cycle and wind cooling, the machine can be applied
into processing heat sensitive material.
2). With the tail-wagging air stream (partly eddy flow) produced by
the tail-wagging of the main shaft capstan of the machine, the
input tail-wagging materials collide strongly with the board and
the cutting blade, and was grinded into powdery (without sieving).
3). Both the board and the cutting blade are made of
abrasion-resistant steel, with excellent performance after heat
treatment.
4). With severeness of framework, the volume of the machine is
quite small. If you open door closure, you can maintain it. It is
completely airproof and without any dust leakage.
5). With winding reclaiming equipment, the machine is features by
cooling materials evenly, quick cooling and some other
characteristics.
6). The new disc design is used, high-yield, strong resistance and
the life of this grinding disc is double than the ordinary.
7). The use of newly designed professional bearings, and reach a
high rotation rate. At the same time using only one drive motor, to
ensure the efficient grinding crash, which greatly saves the time
and operation of machinery and control engineering.
8). Installation and maintenance easy, open the door to cover
clean-up.
9). Milling process of the whole seal, without dust leakage.
10). Full automatic feeding, the materials and sorting.
11). Grinding gap adjustment is simple, just use the plug-foot
bolts and adjustments can be fine-tuning (10-120 mesh).
12). The host used the water and wind double system; Rational
design of smaller cross-section of the grinding chamber, grinding
is almost flat vertical surface. Material entered the grinding
chamber as soon as caught, groud, and then rapidly removed, which
eliminates the grinding chamber of the surge in materials, heating
materials to avoid decomposition, resulting in improved production.
Main Technical parameter:
| Model of Disc type | Power(KW) | Mesh Size(mm) | Capacity(kg/h) |
| RE400 | 30 | 20-80 | 50-150 |
| RE500 | 37 | 20-80 | 120-280 |
| RE600 | 45 | 20-80 | 160-480 |
| RE800 | 75 | 20-80 | 280-880 |
| Model Of Turbo type | Power(KW) | Mesh Size(mm) | Capacity(kg/h) |
| RE400 | 30 | 20-80 | 50-150 |
| RE500 | 37 | 20-80 | 120-300 |
| RE600 | 45 | 20-80 | 180-480 |
| RE800 | 75 | 20-80 | 320-880 |
More Photos of plastic pulverizing machine:
If you want to know more informations,Welcome to contact with us.
