2018-6-26
Customized Corrosion Resistant Sapphire Blue Epoxy Resin Slab For
The Laboratory Worktop
1. Epoxy Slab Description
Color: Sapphire Blue
Thickness: 16 mm ,19 mm,25 mm
Size: 3200*1600mm
Surface: Matte
Mini order : 15 pcs
Delivery time: 15-30 days after receipt of deposit.
2. Epoxy Slabs Custom Colors
Colors
．Black
．White
．Light Grey
．Greman Grey
．Dark Grey
．Sapphire Blue
．Pastel Blue
Custom colors may be requested (availability based upon ability to
match custom color and job size).
A color chip must be submitted to us when requesting a customer
color.
Allow a minimum of eight weeks for shipment after cusomer approval
of ShengStone epoxy resin
3. Epoxy Slabs Physical And Chemical Properties
A). Durable
One core, not to take off layer, not inflation, not cracked,surface
scratches can be repaired after renovation
B). Pollution resistance
Surface is smooth, no stoma, not to hide the dirt, effectively
restrain bacterial growth, such as the SARS virus, etc.,especially
suitable for the medicine and biological laboratories.
C). Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive,
do not produce poisonous gas when heated, will not violate the
safety and health of operator.
D). 24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
E). And laboratory common high temperature 600 degrees, not
foaming, not broken, especially suitable for a long time to place
the combustion furnace ventilation cabinet.
F). Beautiful appearance
Smooth surface (MATT finish) , light reflection, easy to clean,
easy maintenance.
G). Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb
moisture in the air, the installation will not warp deformation,
especially suitable for the operation of splash zone.
H). Uniform color
Ensure the color of different batches of products is permanent, can
be used for multi color selection.
I). High performance to price ratio
Unique 19mm thickness, the market is the highest price of the
laboratory table system.
4. Epoxy Slabs Physical Test Results
| No. | Test Item | Test Method | Result |
| 1 | Compressive Test | ASTM D695-10 | 24000psi |
| 2 | Deflection Temperature Under Load | ASTM D648-07 | 262℃ |
| Method B |
| 3 | Density | ASTM D792-13 | 133.8lb/ft3 |
| Method B |
| 4 | Flexural Strength | ASTM D790-10 | 12200psi |
| Flexural Modulus | Method A | 2350000psi |
| 5 | Rockwell Hardness | ASTM D785-08 | HRM98.3 |
| Procudure A |
| 6 | Horizontal Burning | ASTM D635-10 | Classification:HB |
| 7 | Water Absorption | ASTM D750-98(2010)e1 | 0.03% |
