Energy Saving LED Bulb 24W LED Corn Light SMD2835 E27 B22 2150LM
80Ra 30000 Hours
1. Advantages:
1. To protect eyesight: DC drive, no flicker (ordinary lights are
AC drive, it will inevitably produce strobe).
2. High light efficiency: a company's highest light efficiency in
the laboratory has reached 260lm / W, while the market's single
high-power LED has also exceeded 100lm / W, made of LED
energy-saving lamps, due to the loss of power efficiency, lampshade
Optical loss, the actual efficiency of 60lm / W, and incandescent
lamp is only about 15lm / W, good quality energy-saving lamps in
the 60lm / W or so, so in general, LED energy-saving lighting
effects and energy-saving lamps flat or slightly better . (May 2011
data)
3. High safety factor: the required voltage, current is small, the
safety hazard is small, in the mine and other dangerous places.
4. Large market potential: low voltage, DC power supply, battery,
solar power supply, power shortage, low power facilities in remote
mountain areas and field lighting.
2. Technical Data Sheet:
| Materials | Glass + Plastic + Fireproof material |
| Model | AD-3U-24W |
| Power | 24W |
| Input Voltage | 85-265V with IC constant current driver |
| CRI | 80Ra |
| LED Type | SMD 2835 |
| LED Power | 0.2W |
| LED Lumen | 24LM |
| LED Quantity | 120pcs |
| Lumen | 2150LM |
| Base | E27 B22 |
| Size | φ67*H240mm |
| Beam Angle | 360 degree |
| Color Temp | 3000K 4000K 6500K |
| IP Rate | IP20 |
| Certification | CE RoHS 3C EMC LVD |
| Warranty | 2 years |
3. Description:
Led corn light is an independent light source led lighting, because
the led light beads maximum luminous angle of 120 degrees, taking
into account the uniform light, designed to 360 degrees light, its
shape is like a corn cob, especially known as led corn light.
Led light source is a DC-driven ultra-low power device, shock,
impact resistance, no heat radiation, safe, stable, reliable,
without considering heat dissipation, long life.
The lamp body is compact, easy to install; trendy style,
sophisticated technology, product serialization. The LED light
source has been fully utilized for energy saving and environmental
protection, and does not generate any waste. It is the best product
to replace traditional light sources.
4. Installation:
1. Please cut off the main power and moving out the old lamp,
meanwhile, please ensure your hands are dry. And there must be a
person to watch out in case of any danger.
2. Please install our LED filament bulb, the socket must match
bulb's base. If the socket is E27, then make sure you are
installing E27 base bulbs, the wrong base and socket will cause
short circuit.
3. Please carefully check the installation again to make sure
everything is ok, then switch on. Finally bulb will show a nice
lighting performance.
