Managed POE Network Switch Cisco Catalyst3750 V2 WS-C3750V2-24PS-E
Product Information
Cisco Catalyst 3750 v2 Series Switches are next-generation
energy-efficient Layer 3 Fast Ethernet stackable switches. This new
series of switches supports Cisco® EnergyWise technology, which
enables companies to measure and manage power consumption of
network infrastructure and network-attached devices, thereby
reducing their energy costs and their carbon footprints. The Cisco
Catalyst 3750 v2 Series consumes less power than its predecessors
and is the ideal access layer for enterprise, retail, and
branch-office environments, as it increases productivity and
investment protection by enabling a unified network for data,
voice, and video.
| Product Code | WS-C3750V2-24PS-E |
| Enclosure Type | Rack-mountable 1U |
| Feature Set | IP Services |
| Uplink Interfaces | 2 (SFP or 1000BASE-T) |
| Ports | 24 x 10/100 Ethernet Ports poe |
| Forwarding Bandwidth | 32 Gbps |
| Product Type | Switch - 24 ports - L3 - Managed |
| Forwarding Rate | 6.5 mpps |
| Flash Memory | 32 MB |
| Centimeters | 4.4 x 44.3 x 29.5cm |
| VLAN IDs available | 4K |
More Details
Figure 1 shows the front panel of WS-C750V2-24PS-E
| ① | Switch LEDs | ③ | 24*10/100 ports |
| ② | Mode button | ④ | Dual-purpose ports |
Power over Ethernet
The Cisco Catalyst 3750 v2 Series can provide a lower total cost of
ownership (TCO) for deployments that incorporate Cisco IP Phones,
Cisco Aironet®wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant
end device. PoE eliminates the need for wall power outlets for each
PoE-enabled device and significantly reduces the cost for
additional electrical cabling that would otherwise be necessary in
IP phone and WLAN deployments. The Cisco Catalyst 3750 v2 24-port
PoE switch can support Class 3 PoE or 15.4 watts (W) of PoE power
on all 24 ports. Taking advantage of Cisco Catalyst Intelligent
Power Management, the Cisco Catalyst 3750 v2 48-port PoE
configurations can deliver the necessary power to support 24 ports
at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum
power availability for a converged voice and data network is
attainable when a Cisco Catalyst 3750 v2 Series Switch is combined
with the Cisco RPS 2300 for protection against internal power
supply failures and an uninterruptible power supply (UPS) system to
safeguard against power outages.
Redundant Power System
The Cisco Catalyst 3750 v2 Series access switches support the new
generation of Cisco RPS 2300, which increases availability in a
converged data, voice, and video network by providing transparent
power backup to two of six attached Cisco Catalyst 3750 v2 Series
Switches at the same time. The Cisco Catalyst 3750 v2 Series
Switches are capable of reverting to their internal power supply
without any service interruption. In addition, the Cisco RPS 2300
can be managed by a Cisco Catalyst 3750 v2 Series Switch that is
connected to it.
Related Products
Table below show you stacking cables for the Cisco Catalyst 3750 v2
Series
| CAB-STACK-50CM= | Cisco StackWise 50-cm stacking cable |
| CAB-STACK-1M= | Cisco StackWise 1-m stacking cable |
| CAB-STACK-3M= | Cisco StackWise 3-m stacking cable |
