316L SS 3 way Clamp Sanitary Diaphragm Valve for phamacy hygienic process
Specifications
Product Name: | 3 way Diaphragm Valve |
Valve Body Material: | SS316L |
Seal Material:
| Single sillcone gasket/ Adhesive PTFE+EPDM/Two pieces PTFE+EPDM |
MaxWorking Pressure: | 10Bar |
Max.Working Temperature: | 150 degree C |
Availably size: | 1”-4”, DN25-DN100 |
Availably connection: | Clamp/weld/thread/special connection |
Operated: | Manual,Pneumatic |
Control: | Smart valve positioner / C-TOP control / position sensor |
Certificate: | 3A/54-02 (1580), PED/97/23/EC, FDA.177.2600 |
Application scope: | Dairy,food, beverage, pharmacy, cosmetic etc |
GMP structure: | G1.1 / G1.2 / G2.1 / G2.2 |
SAP structure: | S1.1 / S1.2 / S2.1 / S2.2 |
Applications
Diaphragm valves, no matter be operated manually or pneumatically,
are specialized to be used in the sanitary and aseptic process in
pharmaceutical industry.
The valve is excellent for flow control as well as for ON / OFF
duties.
Compared with other valves, the diaphragm valve is more easilier to
be cleaned. It could process the material with particles better.
And the phenomenon of cavitation is less than before during the
application of flow control.
Standard
3A / BPE / DIN / ISO / IDF
Available structure
Straight, tee, U-type, tank bottom
Description
Various configuration of Diaphragm valve
1. Didaphragm valve with Pisitioner / Process Controller (IL-TOP)
2. Diaphragm valve with Control Unit (C - Top)
3. Valve position Regulator
4. Position Sensor Module
5. Plastic Handle
6. Stainless steel handle
7. Stianless steel acutor
8. Electric Diaphragm valve
9. Plastic Acutor
10. Body: Casting / Forging
Valve Body:
Forging body blank is through a piece of stainless steel ingot, in the forging
process, alongwith the high temperature forging provide, through
extrusion blank shape change, through the forging after bodydendity
higher, the structure is more uniform, no sand hole and other
impurities. Then through theprocessing center carry on the high
precision machining.
Casting body is made by the mould paraffin wax model, paraffin wax model
infiltratiion in ceramic, to letthe whole body wax mold surface
form a layer of strong ceramic. Melt wax modl,then into the melting
ofthe stainless steel solution, after cooling knock off the
appearance of ceramic, blank body is made up.Casting size is very
accurate, the outward apperance is smmoth, clean and tidy.
Diaphragm :
Single Seal : For EPDM the temperature range about -10 to
120degree, And it is suitable for use in vacuum environment
EPDM+PTFE (Adhesive) : Temperature is the same with Single sea, But
For the PTFE diaphragm with high chemical resistance, High
Stability, Good Flexibility, Long life,high Sealing, No cold
Degeneration.It also can use for Steam disinfection System.
EPDM+PTFE(Separate), The Max Temperature can suffer 150 degree can
can work in bad conditions
And when you asked the quotation and didn’t mark the request, we
will provide the EPDM+PTFE(Adhesive) one
About the treatment : If for mechanical polished : Ra about 0.3 um
, If electric polished : Ra about 0.25um. Also can according
customer request
Advantage of our Gasket
1.The valve body and the diaphragm design have a limited set of
sleeves, which can be completed without professionals
2.A raised part is designed between the valve body and the
diaphragm to prevent the risk of residue
3.The manual diaphragm valve is designed with a limit function to
prevent the diaphragm from being damaged due to different
tightening torques
4.Fully degrease valve (clean and can be used without cleaning)
5.Manual, pneumatic, electric, interchangeable without special
tools and professionals
6.We have 3A, CE Certificate, FDA. And the gasket import the
Denmark.
7.Long life , Through the Test it can operation about 3 million
times
Proudct display
