Programmable Hot And Cold Temperature Thermal Cycling Low Impact
Testing Machine Test Shock Relative Humidity Chamber
The advantages of SANWOOD thermal shock test chamber
1.Temperature and humidity setting protection
2.Two zone thermal shock test chamber. Air pressure driven test
area(sample)
3.Error failure medical record table cartilage device
4.HFC environmentally friendly refrigerant, SWEP plate heat
exchanger, two type refrigeration system
5.Optimal structure and high efficiency refrigeration machinery
design
6.Air intakes and returns with sensor control
7.Sever Valve, Kinetic energy automatic load control
8.Testing range: 150(60)℃~ (-10)-65℃
9.50% power saving efficiency and automatic servo control
10.Compatible with BUS CM remote monitoring management system
11.Can expanded: LN2V liquid nitrogen rapid cooling control device
12.Thermal shock test chamber movement time is 10 seconds.Can meet
MIL, IEC and JIS standard.
13.Wind valve switching time is 10 seconds
14. Thermal shock test chamber temperature recovery time is 5
minutes, can meet the test specification
15.The end of the experiment, the product automatically return to
the normal temperature to avoid frost dew
16.The world's first built-in USB2.0 interface digital recorder
(recording can be plugged in at any time)
17.Industrial grade upright full-color touch multilingual
programmable control system
18.The world's first standard shipping included USB2.0 and disk
storage machine dual interface
19.The protective mechanism of return to normal temperature after
the test is finished.
20.The world's first complete test curve analysis shows that there
is no time limit.
SERVICE POLICY
Perfect pre-sale, sale, medium and after sale management system
Pre-Sale
01. After the completion of product packaging, the professional
service personnel will sent the packaging process to the customer.
And tell the customer what time of delivery, and what is the way of
logistics (Such as: sea, land, air. We can select the modes of
transport according to customer requirements
02.We will actively communicate with customers before delivery, to
allow customers to prepare ahead of water, electricity, gas and
other installation requirements of site.
03.Before delivery, if the customer need, can arrange engineers to our
factory, we provide free products debugging training. We can also
provide pick up and arrange accommodation.
04.We will provide free accessories and some commonly used goods
issued, for subsequent customer maintenance. (Such as: wet bulb
gauze, relays etc.)
In Sale
01.A professional customer service personnel will inform the cargo
departure time, and the expected arrival time.
02.In the transport of goods at the same time, we will let the related
product manual, operation manual and installation of video, and
related circuit diagram, structure diagram, frozen map to the
customer for reference.
03.When customers get the goods, we will use video to help customers
to install equipment till it can
be used normally.
After sales
01.Our professional customer service will have a telephone or email
for the use of customers every 2 months, know about the customers'
using, provide timely help.
02.If the customer have problems arised in the use of equipment, when
we receive the feedback questions, we will give response within 2
hours. And give solutions within 24 hours.
03.If you need to replace the parts. Within a year ,we can provide
customers with appropriate accessories free of charge, and online
to assist customers to complete the replacement parts , until the
machine running properly .
04.If necessary, we can arrange professional technical engineers to
provide on-site service free of charge, but customers may need to
undertake some travel expenses for our technical engineers.
OUR COOPERATIVE
Our company and many other companies formed a friendly and
cooperative partnership
