3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detect

Highlights:

100% digital signal for superior clarity and range
High Quality H.264 video signal encoding/decoding with 20-25 frames per second (fps) transmission
Supports up to 4 cameras (one camera included)
Take snapshots (pictures) – requires TF (micro-SD) memory card for saving pictures
User selectable Manual or Motion Detection Audio/Video Recording – requires TF (micro-SD) memory card for saving videos
User selectable Motion Detection Alert (Monitor Beeps when Motion is Detected)
Over 250 frequency-hopping sequences to minimize interference
Digital security for complete privacy – neighbors cannot get audio or video from your camera(s)
Wireless transmission range of approximately 600 feet (200 meters) line-of-sight (open area)
Automatic infra-red night vision technology (approximately 10 feet night-vision range)
Two transmission Modes: Audio & Video, and Audio Only
Intelligent voice activity detector to lower noise and save power/battery
Sleep mode with Voice Activation (VOX) to save power
Set up to 5 alarm settings (e.g. use it to setup, up to 5 feeding/medicine-reminder alarms during a 24 hour period – repeat everyday)
Multi-Language Support (English, French, German, Italian, Spanish)
Both camera and monitor work with 3 different power sources; AC adapter, Computer’s USB port or 3.7V Li-ion battery (AC adapters & batteries and a USB cable included with the system)

Manufacturer Specifications:

Monitor Type / Resolution: 3.2” TFT LCD / 320 x 240
Camera Sensor / Resolution: CMOS / 640 x 480 (VGA)
Video Frame Rate: 25-30 fps (Typical – with no interference)
Transmission Frequency: 2.4GHz (ISM band)
Video Encoding/Decoding: H.264
Audio Encoding/Decoding: SPEEX
Transmission Power: 20dBm
Transmission Rate: 3Mbps
Power Consumption: 350~400mA (Camera); 300~350mA (Monitor)
Audio Sampling Rate:16kHz (16bit)
Frequency Responds: 20Hz - 20kHz
Total Harmonic Distortion:< 0.05%
Signal to Noise Ratio: ≧75dB
Receive Sensitivity: < -90dBm
Battery Recharging: 5 hrs with device powered off (not in use), 10 hrs with device powered on (in use)
Battery Usage (Camera and Monitor): ~ 3 hrs – continuous use ~ 4-6 hrs (with power save/audio only mode)
Memory Card Slot: TF (Micro-SD) up to 16GB capacity (not included)
Supply Voltage: 5V DC, 1000mA AC adapters, computer’s USB port or 3.7V Li-ion battery
Ankaka Wholesale Ref.: OBYTENEN

Package list:

1 x 3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection
1 x USB Cable
1 x Camera Stand/Wall Mount
1 x Monitor Stand
1 x Rechargeable Battery for the Monitor
2 x A/C Adapters: INPUT: 100V-240V 50/60Hz OUTPUT: 5V 1000mA
1 x User Manual