Toilet fittings toilet water tank fittings blue water tank inlet
valve upper water
Closestool is the closestool that we live in the household, can say
every family can see closestool figure.Toilet drain valve everybody
should know.The drain valve is very important for the whole toilet
to be used properly, so it is necessary to master the installation
method of toilet drain valve.Next, how to install the toilet drain
valve?What is the troubleshooting method of toilet drain valve?
How to install toilet drain valve?
1. Preparation: measure the toilet seat and installation position
to ensure the product size is correct and convenient to use.Install
the triangulation valve, and check whether the ground water is
clean and free of foreign material, mainly for the convenience of
the installation of the toilet, and the smooth installation after
installation.
2. Line positioning: put the toilet seat in the position to be
installed, and align the water outlet.Underline the edge of the
toilet with a pencil, and specify the specific position after it is
installed so that it can be fixed with silica gel. Be sure to align
the toilet seat with the lower water port.
3, installation flange: need to check the quality of the flange
before installation, ensure that under the condition of no damage
to install, installation time to place it drains, and then with
silica gel, and ensure that won't produce the problem such as
leakage, flange installation is an important link in the entire
process, if the flange is not installed, then implement in the
process of using water is likely to happen.
4, completes the fixed: implement pencil crossed place daub on
silica gel, this will ensure that tied to the ground and implement,
in the process of the coated silica gel must be silicone coating
evenly, and surface flat as far as possible, so as to assure the
silica gel after dry appearance give a person a kind of neat
feeling.
5. Put forward position: put the toilet seat back in place, and
after fixing the position, clean up the silica gel that spilled on
the bottom.Repair unfitted areas in case of future leakage.
6. Connect water inlet: after the above work is finished, connect
the inlet pipe and connect the water inlet hose of the toilet
seat.To make sure that the connection points are firm, the tube is
free of pressure, and the pipe is not wound to ensure that there
will be no seepage, leakage or running water in the future.
After installation of 7, water testing: implement to align water
experiment was carried out, appropriate adjustment tank water level
of high and low, through sound, check whether unobstructed, normal
water flow velocity, and of course if everything after
commissioning normal, suggest not to use the toilet right now, as
far as possible to the silica gel dry after use, generally need to
use over 24 h after installation.
| Name: | Toilet tank float valve. |
| Type: | S-404-3 |
| Brand: | San-Tide |
| Origin: | Chian xiamen |
| Usage: | manual |
| Foreign trade: | is |
| Material: | ABS |
| Color: | blue |
| Product category: | Cistern fittings |
| Processing mode: | LOGO branded |
| Type: | Fill valve |
| Installation: | The toilet water tank |
| Product features: | Quiet water |
| Standard or Nonstandard: | Standard |
What is the troubleshooting method of toilet drain valve?
1. Failure: water inlet valve is slow (1)
Reason: the water inlet valve seals the water.
Elimination method: first of all, the decorative cover, the arm,
the cover of the valve is removed, then the power arm seal, the
cover of the sealing water plate clean.After the valve cover, arm,
decorative cover back in place can continue to be used.
2. Failure: water inlet valve is slow in water (2)
Reason: there is clutter in the filter.
Troubleshooting: loosen the lock nut and wash the nut in clean
water.
3. Failure: water inlet valve shall not be flooded.
Reason: the buoy is covered with debris or other parts.
Troubleshooting: clean the buoy with clean water and check if other
parts are covered.
4. Failure: the drain valve is leaking.
Reason: the sealing water film has the sand to adhere to and adjust
the cup to have the sundry to resist.
Troubleshooting: wash the water with clean water and check whether
there is sundries in the working of the sealing water plate and the
adjustment cup.
5. Failure: the drain valve button can't be returned after one
work.
Reason: the spring is affected by the seawater or the water quality
that does not meet the sanitation requirement or the push rod of
the button and the key force is not even.
Elimination method: do not use unqualified water quality and rotate
the drain valve of button, can be 360 ° rotation direction of the
push rod.
