Reunion Steel Frame Truss design Architecture Metal Building
construction
- Supply scope: steel frame
- Quantity: 68 Tons
- Contract value: USD64,260
- Description: 50*20*3.5m (L*W*H)*2 suits, steel truss frame, Double
roof
- Anti-corrosion system: Epoxy rich zinc primer + Epoxy mio barrior
middle paint, DFT 100um.
- Project place: Reunion (France)
>> Advantage
1) Anti-seismic: most house use slope roofing which usually use
truss system. The roofing system will be very strong after the
truss was sealed with panels and gypsum board. This kind of
structure system can against 8-degree earthquake, and has high
strength of loading capability.
2) Good Performance for against wind: light weight, high strength,
good integrity, easy to deform, all these advantages make light
gauge steel building good performance for against wind. It can
resist the cyclone at the speed of 70m/s, thus protecting the
building and peoples life.
3) Durability: light gauge steel building uses cold-formed
galvanized steel, thus avoiding rust in the course of construction
and use, and makes the life span of the structure 100 years.
4) Heat Preservation Performance: Heat preservation: we use glass
wool as insulation and effectively avoid the phenomenon of cold
bridge of the wall body. The heat preservation effect of 10mm glass
wool is equivalent to 1m-thick brick wall.
5) Fire Resistance: As the experiment data shows, light steel
system can resist fire for four hours and can effectively slow down
the fire spreading.
6) Sound-proof Performance: Sound-proof performance is an important
item for evaluating the accommodation. Light steel system adopt
hollow glass for windows, which can soundproof for 40 dB. The light
steel wall system can soundproof for 60 dB.
7) Healthiness: dry construction, minimum waste to the environment,
and 100% recyclable of the materials, all these advantages are
conform to the consciousness of environmental protection. Whats
more, the materials we use are all green materials, which are good
for peoples health.
8) Comfort: light steel wall system adopts highly efficient
energy-saving system with respiration function to adjust the
humidity of the room; with ventilation function in the roof,
ensuring the ventilation and hot scattering of the room, thus make
the room more comfortable.
>> Our production line
>> Quality control system
Raw material quality control:
Thickness tolerance re-check
Yield point and tensile strength testing in-house
Third party inspection are welcome
Supply traceable mill certificate.
Structural steel fabrication quality control:
100% testing dimension tolerance <3mm
20% sample welding line ultrasonic testing, no fault, full
penetration
20% magnetic powder testing, no bubble, no defect, Smooth and Full
Supply third-party inspection assistance.
Anto-corrosion system quality control:
Shot blasting to reach grade Sa. 2.5, surface metal luster, no
rust, no oil dirt, no welding spatter, Roughness >75um
Apply primer paint within 4 hours after shot blasting, Holiday-free
coatings, smooth, No dust, Dry Film Thickness (DFT) >75μm.
Pre-assembly testing the connection details:
For special shaped steel structures components, we apply
pre-assembly test in workshop before package and delivery.
>> Steel Building VS Ordinary Buildings:
The cost of steel structure warehouses is usually lower than that
of ordinary buildings. The prefabricated steel structure’s
construction process is usually not as easy to delay the
construction period of other buildings. All drilling, cutting, and
welding are carried out in the factory, and then the parts are
transported to the construction site for installation. Since only
the parts are assembled on-site, there is almost no other cost
increase.
Moreover, the technical requirements for the assembly of this
prefabricated steel warehouse are not high. Almost anyone can do
it, thus reducing labor costs and saving time.
The steel warehouse building was assembled quickly. The
construction of ordinary buildings will take at least a few months.
To build a warehouse of the same size, the steel structure
warehouse’s construction period is only 1/3 of that of other
constructions. In addition to the short construction time, such
steel structure buildings are generally cheaper than ordinary
buildings.
