High Precision Rapid-rate Thermal Cycle Shock Chamber With Vacuum
Testing
Three Zone Thermal Shock Test Chamber
Product Introduction:
Rapid-rate Thermal Cycle Shock Chamber is used to test the bearing
extent of the material structures and composite material in an
instant and continuous high temperature and extremely low
temperature environment, which is in the shortest time to test its
thermal expansion and contraction caused by chemical change or
physical harm.
The equipment is widely used in metal, plastic, rubber, electronics
and other materials and it can be used as an important reference
for improving product quality. It meets the standard of MTL, IEC,
JIS, GJB…
Main Parameters:
| Test method | Pneumatic operated door switch 3 chambers |
| Inner dimension (W*D*H) | 500*450*450mm |
| External dimension (W*D*H) | 1380*1370*1980mm |
| Temperature range | -40 ~ +80℃ |
| High temperature chamber pre-heating range | 60 ~ 100℃ |
| Heating speed | +60→+100℃ about 10 minutes |
| Low temperature chamber pre-cooling range | -65 ~ 0 |
| Cooling speed | Ambient →-65℃ about 65 minutes |
| Temperature deviation | ±3℃ |
| Thermal recovery time | Within 5 minutes |
| External material | Antirust processing cold-rolled steel sheet |
| Internal material | SUS#304 stainless steel |
| Thermal insulation material | Polyurethane foam and fiberglass |
| Coolant | R404A / R23 |
| Cooling method | Air cooling |
| Pressure | 0.2 - 0.5Mpa |
| Power supply | Three phase, 380V, 50Hz |
Features:
1. Perfect appearance and easy to operate.
2. Japan LCD English microcomputer temperature controller, with
high memory capacity, can save 100 programs, max 9999 cycles, each
cycle max time 999hrs.
3. Three chamber structures, high temperature chamber, low
temperature chamber and test chamber, control automatically, stay
and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage,
over temperature of work chamber; compressor over pressure, over
load, short water…
5. Control interface will display alarm reason and provide check
methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within 5 minutes, which
complies with MTL, IEC, JIS, GJB and other international standards.
7. With RS-232C communication port for connecting PC to control,
record and save test report.
High Temperature Chamber:
Heater: NI-CR alloy electric heater
Draught fan: Share centrifugal fan when high temperature and do
environmental temperature, preheating with axial flow fan.
Low Temperature Chamber:
Cooler: Fin cooler, regenerator
Draught fan: centrifugal fan
Refrigerating Device:
Cooling method: mechanical compression refrigeration
Refrigeration compressor: Semi-closed piston
Refrigerant: R23/R404A
Condensation: Stainless steel welded plate heat exchanger
