Gigabit Singlemode Single Fiber Media Converter 20KM 1310 / 1550NM
for Network Centre
Product Description
The MC102 series comply with IEEE 802.3/ab Gigabit Ethernet
standard. It supports two types of media for network connection
such as 10/100/1000 Base-Tto 1000 Base SX/LX and connects these two
types of segments to operate smoothly, MC102 series can be used in
14/16 slot chassis for centralized management.
MC102 series Fiber Media Converter transforms 1000Base-T (Copper
Gigabit) media to1000Base-SX/LX (Fiber Gigabit) media and vice
versa. The 1000Base-T ports up ports full-duplex Gigabit connection
at wire speed with RJ45 connector. The fiber Gigabit connection
supports short wave (SX) or long wave (LX) laser optic with
multi-mode or single-mode SC type connector.
This converter will give your Copper Gigabit connection the ability
to interface with fiber connection over a distance up to 80 km!
10/100/1000means, that media converter that converts the electrical
signal of a10/100/1000 Ethernet signal from copper to fiber. This
solution will offer a low-cost integration option for network
managers who want to migrate from10/100 networks to Gigabit
Ethernet. Gigabit only switches can now be connected to 10/100
networks without the need to upgrade the 10/100 side, allowing
network managers to add new equipment gradually
Key Features:
With WDM technology, single fiber, double utilization rate of fiber
optics
Single fiber media converter must be used in pairs, saying TX
with1310nm, FX with 1550nm or TX with 1550nm, FX with 1310nm or
1490nm
With 1310nm/1550nm or 1310nm/1550nm or 1490/1550nm DFB single fiber
optical-electronic-integration module providing stable and reliable
performance
10/100/1000M auto-adaptation environment, convenient for network
upgrading
With distinct HIC solution, low-temperature-rise chip, no need of
cooling system, realization of flow control, decrease of broadcast
storm
With famous brand optical-electronic-integration module providing
excellent optical and electrical properties to ensure reliable data
transmission and long working life
Supporting broadcast filtering, address auto-learning and
auto-updating, and store-and-
forward operating mechanism
Supporting full-duplex flow control or half-duplex back pressure
working pattern, along with Auto-negotiation
Single RJ-45 electrical port NIC/HUB, auto cross-identification,
link to computer network cards or switches or HUB
Supporting the switches to choose between 10/100/1000Mbps store-and
forward or 1000M straight-through transmission pattern(distinct)
Supporting 1916 byte super data packet transmission
Providing indicator lamps for link-loss, electrical and optical
link diagnosing, dynamic data transmission and full/half duplex,
data rate
With more than 50,000 hours MTBF, complying with telecom operating
standard
Ultra low power dissipation(< 2.5W, Input:AC100 ~ 260V),low
heat, long-time stable work
Technical Description:
| Access Method: | 10/100/1000Mbps Ethernet |
Standard: | IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet,
IEEE802.3ab 1000Base-T ,IEEE802.3z 1000Base-SX/LX Gigabit
thernet,IEEE802.1q,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 1310nm/1550nm |
Distance: | Single Fiber: up to 80km(SM) or 2km(MM) CAT5: 100m |
| Port: | RJ45 Connector: Connecting with STP/UTP Cat5 Optical Connector:MM-SC or ST (fiber dimension: 50,62.5/125μm ) SM-SC or FC ( fiber dimension: 9/125μm ) Single Fiber SM-SC/ FC(fiber dimension: 9/125μm) |
Conversion Method: |
Media Conversion |
| Time Delay | <10us |
| BER: | <1/1000000000 |
LED Indicator | POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted
pair connection 1000M), TP LINK100 (twisted pair connection 100M),
TP ACT (twisted pair packet forwarding action) |
| Power Supply | AC220 50/60Hz, DC 5V1A(external power) or DC 48V |
Power Dissipation: |
<5W |
Operating Temperature: | 0 ~ 50 ℃ |
| Humidity: | 5%~90% |
Storage Temperature: | -40~ 70 ℃ |
Storage Humidity |
5%~90% non-condescending |
Weight | 800g |
Dimension: | 94*71*26mm |
