10 ports POE gigabit ethernet networking switch for voip , IP
camera provide power supply with 2
gigabit ethernet ports and 8 fast ethernet ports
POE for power supply
As useful as PoE has proven to be, it has become clear that the
IEEE 802.3af standard falls short when it comes to certain
demanding scenarios. Power sourcing equipment (PSE) with 802.3af
PoE technology can only provide a maximum of 15.4 W of power to
powered devices (PD). There are many Ethernet-connected devices,
such as the following, that simply need more power:
PTZ/Outdoor Cameras: Low-power IP cameras are well-served by
existing 802.3af PoE technology. However, cameras with
Pan/Tilt/Zoom (PTZ) functionality are increasingly popular, and
these cameras use more power in order to operate their motors.
Cameras that are ruggedized for operations outdoors, especially in
harsh conditions, also need more power in order to use their
heating units. It would be nice to be able to use 802.3af PoE
technology to supply power to each outdoor camera, but 802.3af just
isn’t up to the task of providing enough power for these devices.
8-Port PoE Switch for IP Surveillance
IP surveillance was once affordable only by large enterprises, but
it is now everywhere in our daily life. This is because the prices
of IP camera and PoE switch have dramatically fallen down. In this
case, many people try to set up small-sized IP surveillance systems
by themselves. 10 - port PoE switch is one of the most popular PoE switches for simply IP camera system.
This post will discuss how to use a 8-port PoE switch to build up
IP surveillance camera system.
10 ports 10/100/1000M POE Switch is a Gigabit POE Switch,Which is cost-effective provide network
layout need to simplify wireless access point (AP) and IP-based
surveillance cameras network cameras in order to install in
commercial network and home network. The devices far away from
power socket are very suitable for hanging on the wall or ceiling.
PoE eliminates the need for connecting these devices to power
socket. So it make more flexible for those difficult to connect
with AC power socket, and cut down the installation cost. It is
ideal choice for those want to deploy a small commercial network
and home network that use wireless access point (AP) and IP-based
surveillance cameras.
Features
◆ IEEE 802.3af power on up to 8 ports
◆ Supply power to wireless access points and surveillance cameras
over Cat-5 cabling
◆ 10*10/100/1000 Mbps Ports with AutoUplink™
◆ Supports PoE power up to 15.4W for each PoE port
◆ Supports PoE power up to 150W for all PoE ports
◆ Supports PoE IEEE 802.3af compliant PDs
◆ Supports IEEE 802.3x flow control for Full-duplex Mode and back
pressure for Half-duplex Mode
◆ 1K entry MAC address table of the PoE Switch with auto-learning
and auto-aging
◆ LED indicators for monitoring power, link
◆ Support Vlan and Extend Function
◆ Internal power adapter supply
Specification
 Technical parameter list |
| Product Name | 10-Ports AF PoE Switch with 8 PoE Ports and 2 Gigabit Uplink |
| Connector Type | 10* 10/100/1000M copper cable RJ45 ports(8 PoE ports+2 Uplink) |
| Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP
(≤100 meter) |
| Bandwidth | 20Gbps (non-blocking) |
| Address Database Size | 8K |
| MTBF | 190,000 hours (about 21 years) |
| Forwarding Mode | Store-And-Forward |
| Network Protocols | IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow
Control; IEEE 802.1af DTE Power via MDI; IEEE 802.3af |
| LED Display | System: power supply; Every Port: connecting, PoE working status |
| Power Supply | Power input: AC100-240V 50/60Hz; (every country use a custom power
plug) |
| PoE Ports | Port 1-8 support POE |
| PoE Port Power | 15.4W for each POE port |
| PoE Standard | IEEE 802.3af |
| Led indicator | Green: Ethernet Red:PoE |
| Working Environment | Operating Temperature: -20° ~ 55 ° C; Storage Temperature: -40 ° ~
85 ° C; Operating Humidity: 10% ~ 95%, non-condensing |
| Certification | CE Mark ,commercial; CE/LVD EN60950, RoHS |
| Radiation | CE mark, commercial; FCC Part 15 Class B; VCCI Class B; EN 55022
(CISPR 22), Class B |
| Transmission Distance | Data transmission distance: 100m |
| Warranty | 3 year warranty(1 yeas warranty for power adapter) |
