10 ports POE ehternet switch with 8 POE ports , 2 gigabit ethernet
ports , each POE ports
15.4W for monitoring camera
What is Power over Ethernet?
Power over Ethernet (POE) is a technology that lets network cables
carry electrical power.
For example, a digital security camera normally requires two
connections to be made when it is installed:
A network connection, in order to be able to communicate with video recording and
display equipment
A power connection, to deliver the electrical power the camera needs to operate
However, if the camera is POE-enabled, only the network connection
needs to be made, as it will receive its electrical power from this
cable as well.
Why use POE?
Specifying Power over Ethernet brings many advantages to an
installation:
Time and cost savings - by reducing the time and expense of having electrical power
cabling installed. Network cables do not require a qualified
electrician to fit them, and can be located anywhere.
Flexibility - without being tethered to an electrical outlet, devices such as
IP cameras and wireless access points can be located wherever they
are needed most, and repositioned easily if required.
Safety - POE delivery is intelligent, and designed to protect network
equipment from overload, underpowering, or incorrect installation.
Reliability - POE power comes from a central and universally compatible
source, rather than a collection of distributed wall adapters. It
can be backed-up by an uninterruptible power supply, or controlled
to easily disable or reset devices.
Scalability - having power available on the network means that installation and distribution of network connections is simple and effective.
10 ports 10/100/1000M POE Switch is a Gigabit POE Switch,Which is cost-effective provide network
layout need to simplify wireless access point (AP) and IP-based
surveillance cameras network cameras in order to install in
commercial network and home network. The devices far away from
power socket are very suitable for hanging on the wall or ceiling.
PoE eliminates the need for connecting these devices to power
socket. So it make more flexible for those difficult to connect
with AC power socket, and cut down the installation cost. It is
ideal choice for those want to deploy a small commercial network
and home network that use wireless access point (AP) and IP-based
surveillance cameras.
Features
◆ IEEE 802.3af power on up to 8 ports
◆ Supply power to wireless access points and surveillance cameras
over Cat-5 cabling
◆ 10*10/100/1000 Mbps Ports with AutoUplink™
◆ Supports PoE power up to 15.4W for each PoE port
◆ Supports PoE power up to 150W for all PoE ports
◆ Supports PoE IEEE 802.3af compliant PDs
◆ Supports IEEE 802.3x flow control for Full-duplex Mode and back
pressure for Half-duplex Mode
◆ 1K entry MAC address table of the PoE Switch with auto-learning
and auto-aging
◆ LED indicators for monitoring power, link
◆ Support Vlan and Extend Function
◆ Internal power adapter supply
Specification
 Technical parameter list |
| Product Name | 10-Ports AF PoE Switch with 8 PoE Ports and 2 Gigabit Uplink |
| Connector Type | 10* 10/100/1000M copper cable RJ45 ports(8 PoE ports+2 Uplink) |
| Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP
(≤100 meter) |
| Bandwidth | 20Gbps (non-blocking) |
| Address Database Size | 8K |
| MTBF | 190,000 hours (about 21 years) |
| Forwarding Mode | Store-And-Forward |
| Network Protocols | IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow
Control; IEEE 802.1af DTE Power via MDI; IEEE 802.3af |
| LED Display | System: power supply; Every Port: connecting, PoE working status |
| Power Supply | Power input: AC100-240V 50/60Hz; (every country use a custom power
plug) |
| PoE Ports | Port 1-8 support POE |
| PoE Port Power | 15.4W for each POE port |
| PoE Standard | IEEE 802.3af |
| Led indicator | Green: Ethernet Red:PoE |
| Working Environment | Operating Temperature: -20° ~ 55 ° C; Storage Temperature: -40 ° ~
85 ° C; Operating Humidity: 10% ~ 95%, non-condensing |
| Certification | CE Mark ,commercial; CE/LVD EN60950, RoHS |
| Radiation | CE mark, commercial; FCC Part 15 Class B; VCCI Class B; EN 55022
(CISPR 22), Class B |
| Transmission Distance | Data transmission distance: 100m |
| Warranty | 3 year warranty(1 yeas warranty for power adapter) |
