Horizontal Vertical Construction Materials Testing Equipment For Building Component

Horizontal and Vertical Building Component Fire Resistance Test Furnace

A:

Scope of application:

Applicable to all kinds of structural components such as walls, doors, sliding doors, no doors, windows, columns, shutter doors, fire smoke exhaust valve, in the standard fire conditions to determine its fire resistance.

Standard:

In line with GB/T9978.1-2008, ISO834-1:1999, GB/T9978.4-2008, ISO834 4:2000, GB/T9978.8-2008, ISO834-8:2000, GB/T7633 -2008, ISO3008-2007, GB15930-2007 test standards.

Technical parameters:

1 Instrument composition: fire test furnace, gas flow measurement system, temperature measurement system and pressure measurement and control system.

2 Fireproof test furnace: It is a vertical test furnace with an inner size of 3.5M (length) X3.5M (deep) x 1.25M (high).

3. Furnace structure; The use of steel framework, in the middle of the steel frame with refractory bricks into the furnace wall, furnace wall with high temperature temperature up to 1250 °C. The stove is produced, installed and tested in our factory. According to your company's preset functions, it is disassembled into packages suitable for reassembly and transported into trailers.

B:

Scope of application:

Applicable to the level of the building elements such as beams, plates, ceilings, etc. to determine its fire resistance under standard fire conditions

Standards: in line with GB/T9978.1-2008, ISO834-1:1999, GB/T9978.5-2008, ISO834 5:2000, GB/T9978.6-2008, ISO834-6:2000 and other test standards.

Technical parameters:

1 Instrument composition: fire test furnace, gas flow measurement system, temperature measurement system and pressure measurement and control system.

2. Fireproof test furnace: It is a vertical test furnace with an inner size of 4.5M (length) x 3.5M (deep) x 1.25M (high).

3 furnace body structure: The use of steel frame, in the middle of the steel frame with refractory bricks into the furnace wall, furnace wall with high temperature insulation material, density greater than 1000kgM3. The outer side is covered with color steel, furnace lining material thickness is 65mm, internal temperature test temperature up to 1250 °C. The stove in our factory production, installation of lining and test, according to your company's pre-set function to disassemble the parts package suitable for reloading Enter the trailer to transport.