42" Dryclean Pressing Machine
Manual operation makes 42"Utility Press extremely low in
maintenance.
The 2" inlet/outlet of the Dryset Vacuum increases operational
efficiency.
Features:
- Available in 42" and 45"buck sizes
- 42"manual press handles a variely of clothing types and sizes.
- Manual hand pull and pedals for easy operation and low mainterance.
- 2"vacuum valve for maximum efficiency.
Technical Data:
| Steam Inlet/Outlet – NPT | DN 15 |
| Steam Pressure – psi(bar) | 100(6.9) |
| Steam Consumption – bhp(kg/h) | 0.80 (12.5) |
| Vacuum Size | 2" (50) |
| Width – in (mm) | 55.12 (1400) |
| Depth – in(mm) | 47.24 (1200) |
| High – in(mm) | 48.82 (1240) |
| Net Weight – lb(kg) | 884 (398) |
Shipping Dimensions
L/W/H－in (mm) | 60.63/52.76/55.91
1540/1340/1420 |
| Shipping Weight – lb (kg) | 999 (450) |
How to install Dryclean press machine?
How to operate foot operated/Manual type dryclean presses,steam
pressing machine?
Do not operate the press until the following five steps.
1. Open the stop valve in the steam return line.
2. Open the stop valve slowly, allowing the steam to gradually
enter the press.
3. When operating pressure is reached, open the press drain valve
in the return line and drain the
condensate into a bucket units steam flows freely. Then close the
stop valve tightly.
4. Open the air compressor.
5. open any air inlet valve to the press; check regulator for
maximum 60psi.
The press is now ready for operation.
