Vertical and horizontal style stainless steel filter housing for
high flow filter
Description
In order to adapt to Mid- & Big- system, we designed horizontal
style high flow filter housings, according to principle of fluid
dynamics, add its more reasonable inner construction, it can be
suitable to systems when its flow rate >=1000T / Hour. Because
of its easy-to-install & easy-to- change-outs, this style products
is optical choice of many water treatment clients.
Specification
Table 1, Surface Treatment
| Polishing Type | Physical / Grit Blast |
| Polishing Rating | I-0.6μm / O-0.8μm |
Table 2, Operational Environment
| Pressure | 0.6Mpa /1.0Mpa |
| Max Temp. | 130℃ (266℉) |
| Sterilization | 121℃/30Min. |
Table 3, Material
| Housing | 304, 316L |
| Vent/Drain Valve | 304, 316L |
| Tri-Clasp | 304 |
| Stand Bar | 304 |
| O-ring/Gasket | Silicone, Viton, EPDM |
Table 4, Connection
| Cylinder | Eye Bolt |
| Inlet/outlet | Flange |
| Vent | Quick coupler / Flange |
| Drain | Quick coupler / Flange |
| Gauge | Flange / M14×1.5 |
Optional Filter Cartridge
| D/φ | 150 / 152 / 165mm |
| Style | Pall / Parker / 3M |
| Bag filter cartridge |
| Length | 20” 40” 60” |
Application
It is wildly used in high flow industries, especially in water
treatment field, Eg.: desalination plant pre-filtration, sewage
treatment, swimming pool water circle, etc.
Feature & Benefits
1, Various connector
2, Reasonable frame
3, Universal design
4, All-in-one process
Ordering Information
