G550 Cold Rolled Stainless Steel Coil , Corrugated Roof Sheets 0.15 - 0.8mm Thickness

G550 Galvalume Steel Coils And Sheets 55% Aluzinc Corrugated Roofing Sheets

1. Storage of products

Coils or Sheets should be stored in a dry and ventilated room, instead of being stored in the open air or a place with moisture and a great change of temperature.
The products should be stored in a clean enviroment, preventing from various corrosive substances.
The storage place should be smooth and level, have a good bearing capacity.
Horizontal steel coil should be placed on the brackets with rubber cushions or wooden cushions and be locked with the lock catch on the topside. It mustn't be placed on to the fround or vehicles directly.
To avoid being pressed, the steel coil mustn't be stored in stacking. When the steel sheets are stored in stacking, a limit to every stack should be specified and the sheets with large weight and size should be placed in the lower part of the stack.
The storage of the steel sheets and coils should be scientifically arranged in advance, so as to avoid unnecessary shifting.

2. Mechanical properties of hot dip Al-Zn base

Mechanical properties of steel sheet and strip should be in conformity with the stipulations of following chart.
Because the effects of aging, mechanical properties of the steel strip shall deteriorate with storage time passing, E.g. yield strength and tensile strength will rise, elongation after fracture decreases, formability deteriorates etc. it is suggested to use the material as soon as possible.

For products with nominal thickness greater than 0.50mm, but less than or equal to 0.70mm, the elongation after fracture is allowed to decrease by 2 units. For products with nominal thickness not greater than 0.50mm, the elongation after fracture is allowed to decrease by 4 units.

3. Process of enquiry and order

Please offer the details as following when enquiry and ordering:
Name of product
Technical standard
Weight of coating
Surface treatment
Specifications
Allowance of size
Coil weight
Quantity
Purpose
Packing method
Date of delivery

4. Applications

1) Construction:
Outside: workshop, agricultural warehouse, corrugated roof, wall, retailer booth, roller shutter door, etc.
Inside: door, doorcase, ceiling, elevator, stairway, vent gutter, etc.
2) Electrial Appliance: refrigerator, washer, switch cabinet, desk, bed, micro-wave oven, bread maker
3) Furniture: central heating slice, lampshade, chifforobe, desk, bed, locker, boofshelf
4) Others: writing panel, garbage can, billboard, etc.

5. Packing

Standard Seaworthy Export package including:peripheral anti-rust board, inside anti-rust paper, plastic cannula, latitude strapping, radial srapping, etc.

6. Our service:

1) Free sample offered;
2) Flexible payment term with L/C at sight,TT ,ect;
3) Big quantity supply and short delivery time;
4) Stable and reliable quality
5) Long term after-sale service.

Wuhan Hanke Color Metal Sheet CO.,LTD. (hereinafter referred to as HK), established in 2001, was located in the Wujiashan Economic and Technological Development Zone in Wuhan(No. 359 Gexin Road). HK is a national high-tech enterprise which produces color coating steel sheet primarily. The color coating steel sheet line is designed by WISDR (Wuhan Irion & Steel Design Institute), which owns the advanced processing equipment, testing and inspection equipment and PLC automatic control system of Siemens. In 2009, HK has invested in technological upgrading and equipment improving which improves the production capacity and quality greatly.

HK has obtained Certificates of International Quality Management System Certification (ISO9001) in 2005, Korea Industrial Standard Certification (KS D 3520) in 2013 and International Environmental Management System Certification (IS14001) in 2014. At the same time, HK gains honors of “Famous Trademark of Wuhan”, “Famous Trademark of Hubei”, ”Credit Enterprise”, etc. since establishment.

Our main product is color coating metal sheet. It uses the finishing hot galvanized steel as the raw materials, which is produced by Wuhan Iron and Steel (Group) Corporation (hereinafter referred to as WISCO), and we customize the special GI mark DX51D+Z(HK) with them. We have signed strategic cooperation agreement with Double-Tiger Coatings Limited Company which focuses on coating for more than 100 years, and have set up a public laboratory of coating, which lay a solid foundation to improve HK products’ quality.

Our products have a complete range of specifications and colors, we have a series of colors which are familiars with customers abroad to choose, as well as customized according to customer’s requirement. Wuhan and other cities in Hubei are our basic market, and our business is expanding to surrounding provinces. We also export to Southeast and South of Asia, the Middle East, South Korea and Russia, etc. HK has a good prestige and public praise in the domestic and foreign market.

HK is keeping on developing new markets. Meanwhile, we pay much attention to brand building and quality improvement of product. All the time, HK has been sticking to the brand conception of “good base zinc, good surface color, and every lay has its value”, insisting on the enterprise principle of “honesty, consideration, and quality”, and continuing to promote HK products from the country to the world .

In order to meet customer's requirement and expand market, one trading company in China and one in Singapore were established at the right moment, which is much more convenient for customer and us.