Customized Walk In Chamber with chiller Temperature and Humidity Test

Customized Big-type Walk In Chamber with chiller

Product Description:

1. Safety Assurance:

Standard is a redundant control circuit with its own controller and failsafe contactor. To prevent thermal runaway, the safety control shuts off power to the heater circuit and the circulation blowers continue to distriibute heat within the room. This feature is particularly important if there are heat-generating items in the walk-in room. When the temperature goes down, the safety control closes and power is restored to the heaters.

1.1 Other available safety options are:

High Temperature Safety with Complete Shut Down of Room with Manual Reset and Visual Indication,

Low Temperature Safety with Complete Shut Down of Room with Manual Reset and Visual Indication,

Both High and Low Temperature Safety with Manual Reset on Both and Visual Indication, Audible Alarm, and Remote Station Alarms.

Model		SMC-1000-CC	SMC-1800-CC	SMC-2520-CC	SMC-3600-CC	SMC-5000-CC	SMC-8000-CC
Temperature	Temperature control range	-70℃～180℃ (A:0℃～180℃;B:-20℃～180℃；C:-40℃～180℃;D:-70℃～180℃)
	Temperature fluctuation	±0.5℃
	Cooling rate	180.0℃～-70.0℃ Within 100 mins 1.0～3.0℃/min
	Heating rate	-70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min
	Temperature uniformity	±1.5℃ (-40.0℃～100.0℃)
		±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃)
Humidity	Humidity control range	10.0%RH～98.0%RH( 60℃ above corresponds to 11%RH )
	Humidity fluctuation	±1.0% RH
	Humidity uniformity	±2.0％RH
Material /	Internal material	Adopts 1.2mm thickness stainess steel(SUS304)
components	External material	Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying
	Heat insulating material	100mm thickness polyurethane plate＋10mm thickness mineral wool
	Fan	Centrifugal blower
	Compressor	Fully-closed/	Semi-closed	Semi-closed	Semi-closed	Semi-closed	Semi-closed
		Semi-closed
	Condenser	Air cooling,	Air cooling,	Water cooling	Water cooling	Water cooling	Water cooling
		water cooling	water cooling
	Refrigerant	R404A,R23,R508
	Evaporator	Fin - and - Tube Heat Exchanger
	Heater	Nickel chromium alloy heating wire
	Humidifier	Steam humidifier
Size	Interior size(mm)	1000*1000* 1000	1000*1500* 1200	1200*1500* 1400	1200*2000* 1500	1500*1800* 1850	2000*2000* 2000
	W*H*D
	Outer size(mm)	1200*1550* 2450	1200*2000* 2650	1400*2000* 2850	1400*2350* 2950	1700*2150* 3300	2300*2450* 3600
	W*H*D
	Volume(L)	1000L	1800L	2520L	3600L	5000L	8000L
Power supply		380V AC 50/60Hz
Controller		Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700

2. Temperature and Humidity Test Chamber Basic introduction:

Environmental test chamberr/constant temperature and humidity chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.

Need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement.

3. Explore Walk-In Rooms by SANWOOD:

Associated Environmental Systems offers a range of prefabricated, tight-tolerance environmental walk-in rooms that are easy to ship and install. Major features include:

Forced air circulation systems distribute air evenly and constantly recirculate it, maintaining uniform and accurate temperatures and humidity.

Temperature Ranges are from -60°C (-140°F) to +120°C (458°F ).

Refrigeration system meets the room's load demand and operates continuously in cooling mode. Single-stage mechanical units operate at -35°C and above and two-stage cascade units at below -35°C.

​Electric heating system provides very accurate and straight line control of temperatures. System is reliable and has a long life.

Humidity System choices are the conditioned fine Mist System or the Steam Generator System. Different ranges are available including special dehumidity ranges to 5% RH.

Prefabricated room construction consists of modular, sandwich-type panels with a metal skin inside and outside. Panels are easy to ship and assemble.

Multipane viewing windows can be ordered in custom sizes.

Incandescent or fluorescent lighting is vapor-proofed and sealed.

Instrumentation consists of single or two-channel microprocessor programmers with an accuracy of ±.25°C or better at the sensor. Other options include: RS-232C, RS-422A, IEEE-488 interface.

Safety standard is a redundant control circuit with its own controller and failsafe contactor. Many other options are available.

Product Catalog:

Large Temperature (& Humidity) Test Chamber.pdf

SANWOOD PRODUCTION

SANWOOD Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established.

OUR EXHIBITION

Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.

CUSTOMER WITNESS

Products are exported to more than 60 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc.

SANWOOD CULTURE

Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the worldber.

Guangdong Sanwood Technology Co., Ltd, founded at 1995, with 25 years manufacturing experience, we are now engaging 100+ workers and 20+ engineers (structure, refrigerant, assembly, quality control, pre-tests), 2 production lines with facility 6,000+ square meters, monthly capability reaches to 120 units which makes annual production capability more than 1,000 units. Products cover the full range of battery cells, modules and packs or even the whole automobile to run the environmental reliability tests.

Achieved national high enterprise reward, certified with ISO9001:2015, ISO14001:2015 and CE certificate, our products are exporting to more than 60 countries and regions, cooperated with top manufacturers in the EV lithium-ion battery industry such as ATL, BYD, CATL, Envision AESC, Farasis, Lishen, Sunwoda, Svolt and major playes in the European markets.

Customer service is as important as product quality, we are planning to build our European sales & service center to further iron our instant and efficient after-sales services for our clients.

Sanwood, born to provide high quality products! Leave us a message or give us a call TODAY to propose you a tailored test solutions.