DA-II ASTM D86 Manual Type Distillation Apparatus
Summary
DA-II Distillation Tester is designed and made as per standards
GB/T6536 Test Method for Distillation Characteristics of Petroleum
Products and ASTM D86 Standard Test Method of Distillation for
Petroleum Products at Atmospheric Pressure. It is suitable to
determine the distillation characteristics of gasoline, aviation
gasoline, jet fuels, solvent having special boiling point, naphtha,
diesel oil, distillate fuels, and other petroleum products.
This instrument is not only suitable to the organizations of high
frequency with various of samples but also accelerate the test
speed for common users. It is an ideal distillation tester for
petroleum products.
I. Main technical features
1.The apparatus adopts double units working mode, can do test for
one sample as well as two samples which having the same
specification or different specifications.It highly improves the
work efficiency.
2.It adopts two groups of independent digital temperature
controller, heater, electric stirrer to constitute two constant
temperature baths. Each bath temperature can be adjusted and
controlled independently.The temperature in the bath is uniform,can
fully meet the requirements of test.
3.DA-II Distillation apparatus adopts special heating furnace to ensure the safety of test.
Heating power can be continuously adjusted to meet the requirements
of test.
II. Main technical specifications
1.Power supply: AC(220±10%)V, 50Hz
2.Heating power: 1000W×2, continuously adjustable.
3.Receiving cylinder: 100ml, division value 1ml.
4.Distillation flask: 125ml,meet the requirements of GB/T 6536 and
ASTM D86
5.Thermometer: (-2~300)℃ and (-2~400)℃, division value 1℃
6.Flask support board: SiC, bore diameter φ32mm, φ38mm, φ50mm.
7.Temperature controller: 1) Range: (Ambient +10)℃～60℃
2) Accuracy: ±0.5℃
3) Display: LED
Note: The temperature control is to control the temperature of
condensate in the condenser pipe.
8.Ambient temperature: ≤35℃
9.Relative humidity: ≤85%
10.Maximum power consumption: 2200W
11.Dimension:760mm×520mm×500mm
III.Accessories
| No. | Item | Unit | Qty | Remarks |
| 1 | Distillation flask (125 ml) | Piece | 2 | |
| 2 | Thermometer (－2∼300)℃,(－2∼400)℃,scale division is 1℃ | Piece | 2 for each | |
| 3 | Glass container (Φ100mm×240mm) | Piece | 2 | |
| 4 | Silica gel stopper (3#) | Piece | 4 | |
| 5 | Silica gel stopper (4#) | Piece | 4 | |
| 6 | Silicon carbide board, pore size Φ32mm,Φ38mm,Φ50mm | Piece | 2 for each | |
| 7 | Graduated flask (100 ml) | Piece | 2 | |
| 8 | Iron block | Piece | 2 | |
| 9 | Test platform (pad under the test vessel) | Piece | 2 | |
| 10 | 10 A fuse (Φ5×20) | Piece | 3 | |
| 11 | Condensate pipe outlet cover | Piece | 2 | |
| 12 | Stopping ring for thermometer (1 #) | Piece | 8 | |
| 13 | Observation window glass | Piece | 2 | |
