1. Adopting doubling technique of intracavity frequency has greatly
improve the stability of laser.
Design on laser cavity adopts a series of optimization method, so
as to ensure the beam quality as the fundamental mode.
2. The machine takes 355nm pumped purple light laser device as the
light source.Narrower pulse width and smaller heat affection
contribute to generate peak power.
3.Higher pulse stability, namely better pulse consistency of laser
produces the same carving effect, so it’s very suitable for
precision marking. Higher pulse repetition frequency meets the need
of quick marking and high production efficiency.
4. High efficiency of the photoelectric conversion and long service
life.
5. Automatic in a rotary table (optional item), convenient feeding,
fast speed, high efficiency.
6. It can support logos and graphs designed in DXF format from
Auto-CAD, PLT, BMF, AI, JPG, etc.
7. It can mark date, bar code and two-dimension code automatically.
8. Superior performance, good stability, high conversion rate and
low energy consumption.
1.Mark on coated silicon solar panel, Remove the surface film on
object:
2.Mark on mobile protection film, LCD screen , optic device,
automobile glass etc.,
3.Also suitable for most of metal and non-metal material marking or
coated surface marking, ie, hardware, ceramic, glasses, clock ,PC,
electronic device, PCB and control panel, nameplate and plastic
material etc.
Technical Parameters
odel | MH-UV10, MH-UV5 |
Laser Power | 10W,5W |
Wavelength | 355nm |
Frequency | 1-100KHz |
Marking Scope | 110x110mm; 145x145mm (Optional) |
Marking Speed | 12000mm/s |
Minimum line width | 0.01mm |
Minimum Character | 0.1mm |
Repeat Accuracy | 0.002mm |
Cooling Method | Air Cooling for 3W/5W; Water Cooling for 10W |
Power Supply | AC220V/50Hz |
Keywords | UV laser marking machine |
Applicable material | Almost all material's marking, especially outstanding performance
for plastic. |
