Redundant Power Supply Module GE Fanuc VersaMax IC200MDl240J AC
INPUT MODULE
Product Description
These discrete input modules have positive logic or sourcing-type
inputs; they receive current from AC input devices and return the
current on the common. Input devices are connected between the
input terminals and common terminals. Discrete Input Modules
IC200MDL140, IC200MDL141, BXIOIA8120 and BXIOIA8240 provide one
group of 8 discrete inputs. Discrete Input Modules IC200MDL240,
IC200MDL241 (shown below), and BXIOIA16120 provide two groups of 8
discrete inputs.
Power for module operation comes from the backplane. Intelligent
processing for the module is performed by the CPU or NIU.
LED Indicators
Individual green LEDs indicate the on/off state of each input
point. The green OK LED is on when backplane power is present to
the module.
Product Revision History
IC200MDL140F / BXIOIA8120F
IC200MDL141F / BXIOIA8240F
IC200MDL240G / BXIOIA16120G
IC200MDL241G
May 2009 Change of
manufacturing location.
IC200MDL140E / BXIOIA8120E
IC200MDL141E / BXIOIA8240E
IC200MDL240F / BXIOIA16120F
IC200MDL241F
Oct. 2008 Updated Power Supply
OK signal circuitry.
IC200MDL140D / BXIOIA8120D
IC200MDL141D / BXIOIA8240D
IC200MDL240E / BXIOIA16120E
IC200MDL241E
Apr. 2005 Plastic change on
locking mechanism
IC200MDL140C
IC200MDL141C
IC200MDL240D
IC200MDL241D
Apr. 2004 Changed to V0 plastic for module housing.
BXIOIA8120C
BXIOIA8240C
BXIOIA16120D
Jan. 2004 Changed to V0 plasticfor module housing.
ATEX approval for Group 2 Category 3
applications.
IC200MDL140B IC200MDL141B
IC200MDL240C IC200MDL241C
Jan. 2004 ATEX approval for
Group 2 Category 3
applications.
IC200MDL140A / BXIOIA8120A
IC200MDL141A / BXIOIA8240A
Mar.1999
Initial product release
IC200MDL240A / BXIOIA16120A
IC200MDL241A
Sep.1998Initial
Installation in Hazardous Locations
•EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C & D,
DIV. 2 HAZARDOUS LOCATIONS IS SUITABLE FOR USE IN CLASS I, DIVISION
2, GROUPS A, B, C, D OR NON-HAZARDOUS LOCATIONS ONLY
• WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR CLASS I, DIVISION 2;
• WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN
OFF POWER BEFORE REPLACING OR WIRING MODULES; AND
• WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS
POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NONHAZARDOUS.
Preinstallation Check
Carefully inspect all shipping containers for damage. If any
equipment is damaged, notify the delivery service immediately. Save
the damaged shipping container for inspection by the delivery
service. After unpacking the equipment, record all serial numbers.
Save the shipping containers and packing material in case it is
necessary to transport or ship any part of the system.
Wiring Connections for Carriers with Two Rows of Terminals Row B
connections shown below are for 16-point modules only
Wiring Connections for Carriers with Three Rows of Terminals Side B
connections shown below are for 16-point modules only.
Operating Note
If hot insertion of a module is done improperly, the operation of
other modules on the same backplane may be disrupted. See
Installing a Module on a Carrier in the VersaMax Modules Manual,
GFK-1504.
No derating is required for the 8-point modules in any orientation,
or for the 16-point modules if they are mounted vertically (A, B)
on the DIN rail.
For IC200MDL240 and BXIOIA16120 modules that are mounted
horizontally (C, D) on the DIN rail, no derating is required at
120VAC. Deratings at 132VAC are shown below.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
