10G SM Duplex port optical transceiver SFP+ compatible Cisco
SFP-10G-LR
Description:
Optical fiber module classification: according to function:It
includes optical receiving module, optical transmitting module,
optical transceiver module and optical transmitting module
SFP+-10GB-LR is a very compact 10Gb/s optical transceiver module for serial
optical communication applications at 10Gb/s. The SFP+-10GB-LR converts a 10Gb/s serial electrical data stream to 10Gb/s optical
output signal and a 10Gb/s optical input signal to 10Gb/s serial
electrical data streams. The high speed 10Gb/s electrical interface
is fully compliant with SFI specification.
About the SFP instructure:
1:We use Ultra advanced plug-in,electroplating hard gold work,can
ensure repeated plug and play,strict control of each product,to
ensure stable transmission
2:SFP uses the golden finger pin definition,so that the function of
the module is different,and the order of the power on the foot is
different.
3:the fine inspection of the gold finger allows precise combination
of circuit board components and reduces the temperature generated
by the module operation
Feature:
Hot-pluggable SFP+ footprint
l Supports 9.5 to 10.3Gb/s bit rates
l Power dissipation < 1.5W
l Single 3.3V power supply
l Maximum link length of 20km
l CWDM wavelength EML transmitter, PIN photo-detector
l Duplex LC connector
l Power dissipation < 1.5W
l Built-in digital diagnostic functions
l Case temperature range :-5°C to 70°C
Compatiblity
All brand compatible
like:Cisco,Huawei,H3C,Netgear,Nortel,Extreme,Foundry,Alcatel,Allied,HP,3COM,Juniper,Enterasys....
We can support almost all the brand compatible SFP transceiver for
network and telcom
| Product details |
| Device Type | SFP+ transceiver module - LC/PC single-mode |
| Enclosure Type | Plug-in module |
| Cabling Type | 10GBase-LR |
| Data Transfer Rate | 10 Gbps |
| Optical Wave Length | 1330/1270nm |
| Data Link Protocol | 10 Gigabit Ethernet |
| Max Transfer Distance | 20KM |
| Compliant Standards | IEEE 802.3ae |
| Warranty | 3years |
| Designed For | Catalyst Switch Module 3012 for IBM BladeCenter, Switch Module
3110G for IBM BladeCenter,
Switch Module 3110X for IBM BladeCenter; Nexus 5010 |
| Rate | Wavelength | Transmission distance | Package | Temperature | Type |
| 10G | 1270/1330 | 10KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1330/1270 | 10KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1270/1330 | 20KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1330/1270 | 20KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1270/1330 | 40KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1330/1270 | 40KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1270/1330 | 60KM | SFP+ | 0~70 | DFB+PIN |
| 10G | 1330/1270 | 60KM | SFP+ | 0~70 | DFB+PIN |
When installing the module, confirm that the pull ring end is
upwards, and the gold finger tip is directly inserted into the
device.
It's simple and more convenient to pull out the module, pull out
the pull ring and pull it out.
Good quality is not afraid of the real machine dismantling
