Fiber Optic Tools of LC / MU one click cleaner - 1.25mm for ferrule
endface cleaning
Fiber Optic Cleaner-Mini Designed to specially work well with the
LC,MU,SC, FC, ST and MPO connectors, this instrument cleans the
ferrule end faces removing dust, oil, and other debris without
nicking or scratching the end face.
The LC/MU Cleaner is a high-performance device designed for
cleaning the ferrule end-faces of LC&MU connectors. Cost
effective tool for cleaning fiber end-faces without the use of
alcohol. The LC/MU connector cleaner is designed to clean both
exposed jumper ends and connectors in Adapters.
LC/MU 1.25mm One click Cleaner is an innovative design of the new
fiber end-face cleaner, using a special dust-free clean wire
material and full contact cleaning way, different types of
pollution can be cleaned at one time and cleaning effect is better.
This pen can be used to clean the LC / MU connectors, male or
female is ok
| Model Number | OMCOCPC-125 | Classification Color | Blue |
| Target Use | LC /MU adapter | Polish Type | APC/UPC |
| Target Use | LC /MU connector | No. of Cleanings | ≥ 800 times |
Structure Drawing & Specification
AS for the structure of cleaner, It can be divided into the cover
guide cap, guide cap, cleaning tip and a body part. Cover guide cap
protects cleaner from dust; guide cap is used for connecter
cleaning; cleaning tip can be extended for adapter cleaning;
cleaning body is used for adjusting the position of tip as standard
position or extended position.
Features
- Cleans connectors on jumpers and in adapters
- Ergonomic, comfortable design with single action cleaning
- Effective on a variety of contaminators including dust and oils
- Disposable with 800+ cleanings per unit
- Made from anti-static resin
- Cleaning micro fibers are densely stranded and debris free
- Extendable tip reaches recessed connectors
- Cleaning system rotates 180 for a full sweep
- Audible click when engaged
Application
The LC/MU 1.25mm One-click Cleaner is dry cloth cleaners specially
designed to clean single connector residing in an adapter,
faceplate or bulkhead. They are simple to use and highly effective
at removing oil and dust contaminants. That can negatively impact
optical performance.
Fiber Optic Cleaning Guide
Why Should We Clean the Connectors?
Research has shown over 85% of fiber optic network failures in data
centers, campus, and other optical communication facilities are
caused by contamination on the optical connector end face.
For best optical performance, it is imperative that all optical
fiber connections are clean and free of contaminants. Fiber optic
cleaning products is being highly recommended as a kind of very
important tool for electrical manufactures. One of the most basic
and important procedures for the maintenance of fiber optic systems
is to clean the fiber optic equipment.
OMC's fiber optic connector cleaner is designed to effectively and
quickly clean connector end faces, both the unmated patch cord and
through the adapter. It cleans the ferrule end faces removing dust,
oil, and other debris without nicking or scratching the end face.
It is very easy to use and suitable for LC/SC/FC/ST/MU/D4/DIN
connectors.
