Truck AKL-350B water well drilling rig for sale in japan
1. Widely used in the water well, exploration and urban
construction;
2. Normal and reverse circulation are the main drill methods,
equipped with horizontal dual-cylinder mud pump.;
3. Power supplied by truck engine, equipped with driving device and
hydraulic system, truck walking and drilling work can
make the same machine linkage.
4. Equipped with a 55kw generator and electrical controling system
to get the dual-power drill work by electric and truck
engine supplied.
5. Equipped with hydraulic winches, tower pulley block and taps on
both sides of the rings linkage auxiliary pressure device.
6. Equipped with 85E a auxiliary hydraulic winch, CB-HP5050/32Z
hydraulic pump, BW850/2A mud pump, MF-15 generator.
7. Mechanical drive for tower up-down, 4 hydraulic supporting legs
and 2 mechanical supporting legs.
8. The drilling machine can be equipped with construction techniques
such as superfluid, high pressure slurry filling and
dry method bore forming
1: What is the main application of AKL-350B?
Mainly for water wells, construction, national defense building
foundations, geological exploration, geothermic well and other foundation working.
2: What kind of working strata is efficient for this drill rig?
Different strata will be allowable, such as, soil, sandy, clay,
sediment, pebble, granite, gravel, limestone, etc. Certainly, the relative drill bits will be supplied accordingly in different
place during your whole drilling work
3: Could you train our workers?
Yes, we will send engineers to you there to help you learn how to
handle it. Also we will be responsible all the time.
| Drilling depth (M) | 80 | 300 |
| Borehole diameter (mm) | 1500 | 500 |
| Rotary table speed (r/min) | 21.2; 36; 63.2; 100.6; 155; 20.2 (reverse) |
| Rotary table torque (KN.m) | 18; 10.6; 6; 3.8; 2.5; 18.9 (reverse) |
| Pull force of the main winch (with single winch rope) (KN) | 30 |
| Max. pull force of the main winch (KN) | 180 |
| Pull force of the auxiliary hydraulic winch (with single winch
rope) (KN) | 40 |
| Max. pull force of the auxiliary hydraulic winch (KN) | 160 |
| Elevating capacity of the hook (KN) | 180 |
| Carrying capacity of the drill tower (KN) | 180 |
| Drill tower height (mm) | 11500 |
| Load bearing capacity (t) | 25 |
| Drill stem | Main drill stem (mm) | 108×108×7500 |
| Second drill stem (mm) | 89×10×5500 |
| Hydraulic oil pump | Model | CB-HP50/32Z |
| Capacity (ml/r) | 50/32 |
| Rated speed (r/min) | 2000 |
| Rated pressure (MPa) | 20 |
| BW850/2A slurry pump / mud pump | Cylinder sleeve diameter (mm) | 150 |
| Piston travel (mm) | 180 |
| Theoretical flow rate (L/min) | 600850 |
| Rated pressure (Mpa) | 32 |
| Stroke frequency (min-1) | 5882 |
| Suction pipe diameter (mm) | 127 |
| Drain pipe diameter (mm) | 64 |
| Rotation speed (r/min) | 470 |
| Input power (kw) | 40 |
| Overall dimension (mm) | 2000×1030×1400 |
| Weight (t) | 1.5 |
| Matching power unit | Diesel engine | Model | TBD226B-6Ⅱwater cooled, 4-stroke, intercooled supercharged diesel engine |
| Rated power (KW) | 132 |
| Speed (r/min) | 2300 |
| Max. torque | 650N.m/1400-1500rpm |
| Chassis | Model | TAZ5191TZJ |
| Drive type | 6×4 |
| Engine | Model and type | TBD226B-6Ⅱ water cooled, 4-stroke, intercooled supercharged diesel engine,
Euro Ⅱ |
| Rated power (KW) | 132 |
| Rotation speed (r/min) | 2300 |
| Overall dimension (L×W×H)(mm) | 11110×2490×2500 |
| Generating set | Model | MF |
| Rated power (kw) | 15 |
| Rated voltage (v) | 400 |
| Rated current (A) | 27 |
| Power factor | 0.8 |
| Speed (r/min) | 1500 |
| Rated frequency (Hz) | 50 |
| Insulation class | H |
| Protection rating | IP21 |
| Optimum gear of the gearbox in driving cab (rotation speed) | 5th gear (1000-1400r/min) |
| Max. truck travel speed (Km/h) | 75 |
| Weight (kg) | 19340 |
| Transport dimensions (L×W×H) (mm) | 12160*2490*3440 |
| Overall dimension (L×W×H) (mm) | 11110*2490*13110 |
