1.The motor runs but the sliding gate operator doesn't work.
A:Check whether the clutch is closed.
2.The power indicator light doesn't flash and the key doesn't
react.
A:Check whether power is connected right.
B:Check whether the fusel is burned,if yes,please exchange it.
3.The opening and closing limit can not work.
A:Check whether the limit adjustment switch is installed right.
B:Check whether the limit iron is installed right.Adjust the
position of the limit iron.
4.Crash proof is not effective.
A:Check whether the connetion of crash proof is correct.
B:Check whether the photocell is installed right.
C:Check whether the connection of the wire of loop detector is
right.
5.When the gate just close up,it turns to open.
A:Check whether the vlotage is normal.
B:If the crash proof equipment is installed,pease check whether it
works well.
6.The remote control doesn't work.
A:Check whether the battery is work.If yes,change it.
B:Check whether the code of the remote control is the same with the
code of the control
Contact:
Sue Zhang
Tel/Whats/Wechat : 0086 158 7925 9831
Email : sue@wonsunbarrier.com | Skype Id : Sue Zhang
Shenzhen Wonsun Machinery & Electrical Technology Co., Ltd
Add: Floor 1, Zhigu, No. 2-10, South jinlong avenue, Shahu
community, Biling street, Pingshan district, Shenzhen, China
