Rubber Based Hot Melt Adhesive Glue For Cast Coated Paper Labels
Paper Stickers
DESCRIPTION
This Synthetic rubber based hot melt adhesive specifically
developed for cast coated labels and paper stickers. The product is
featured good machinability and provides good penetration and
wettability to various paper substrates, die cutting well.
| Name | PSA Hot Melt Adhesive for cast coated paper labels |
| Appearance | Transparent block |
| Color (Ghana) | Light Yellow |
| toxicity | No |
| Suggested running temperature | 150-180°C |
| Shelf life | 12 months |
| Storage | Clean and dry environment |
| Packing | 1 kg/pc, 25kgs/carton |
| Lead Time | 10~14 working days after order confirmed |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 180
℃ for both, depending on machines, substrates, and plant
conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper,
25kg/box or 180kg fibre drum.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature
below 350
C and above 5℃.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to
prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks
and using the oldest stock first.
