Industrial Servo Motor YASKAWA ELECTRIC AC Servo Motor
SGMGH-30ACA6C
Warning
YASKAWA manufactures component parts that can be used in a wide
variety of industrial applications. The selection and application
of YASKAWA products remain the responsibility of the equipment
designer or end user. YASKAWA accepts no responsibility for the way
its products are incorporated into the final system design. Under
no circumstances should any YASKAWA product be incorporated into
any product or design as the exclusive or sole safety control.
Without exception, all controls should be designed to detect faults
dynamically and fail safely under all circumstances. All products
designed to incorporate a component part manufactured by YASKAWA
must be supplied to the end user with appropriate warnings and
instructions as to that part’s safe use and operation. Any warnings
provided by YASKAWA must be promptly provided to the end user.
YASKAWA offers an express warranty only as to the quality of its
products in conforming to standards and specifications published in
the YASKAWA manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS
OFFERED. YASKAWA assumes no liability for any personal injury,
property damage, losses, or claims arising from misapplication of
its products
Specifications
| Manufacturer: | Yaskawa |
| Series: | Motors |
| Weight: | Ask |
| Approvals: | UL, CE, cUL Recognized |
| Brake: | Yes |
| Brand: | Yaskawa |
| Constant Torque (Lb-In): | 165 |
| Constant Torque (Nm): | 18.6 |
| Constant Torque (Oz-In): | 2,640 |
| Encoder Bit Resolution: | 17 BIT |
| Encoder Type: | Incremental |
| H x W x D: | 10.67 in x 7.09 in x 7.09 in |
| IP Rating: | IP67 |
| kW: | 3 KiloWatts |
| Max Speed: | 3,000 RPM |
| Mounting Type: | Flange Mount |
| Peak Torque (Lb-In): | 400 |
| Peak Torque (Nm): | 45.1 |
| Peak Torque (Oz-In): | 6,400 |
| Rated Speed: | 1,500 RPM |
| Series: | SGMGH |
| Servomotor Type: | General Purpose |
| Shaft Seal: | No |
| Subcategory: | Servo |
| Voltage: | 200 VAC |
Similar Products
| SGDV-180A15A |
| SGDV-180A25A |
| SGDV-1R6A01A |
| SGDV-1R6A01A+SGMJV-02ADA2C |
| SGDV-1R6A11A |
| SGDV-1R6A15A |
| SGDV-1R6A21A |
| SGDV-1R6A25A |
| SGDV-200A01A |
| SGDV-200A01A00200+SGMGV-30ADV61 |
| SGDV-200A05A |
| SGDV-200A25A |
| SGDV-2R8A01A |
| SGDV-2R8A01A002000 |
| SGDV-2R8A11A |
| SGDV-330A01A |
| SGDV-330A01A+SGMGV-44NDB6C |
| SGDV-330A11A+SGMGV-44ADC61 |
| SGDV-3R8A01A |
| SGDV-3R8A05A |
| SGDV-3R8A11A |
| SGDV-5R5A01A |
| SGDV-5R5A01A+SGMJV-08ADA2C |
| SGDV-5R5A01B00200 |
| SGDV-5R5A11A |
| SGDV-5R5A21A |
| SGDV-7R6A01A |
| SGDV-7R6A05A |
| SGDV-7R6A15A |
| SGDV-8R4D01A |
| SGDV-8R4D01A, |
| SGDV-R70A01A |
| SGDV-R70A11A |
| SGDV-R70A15A |
| SGDV-R70A21A |
| SGDV-R70F21A |
| SGDV-R90A01A |
| SGDV-R90A01A+SGMJV-01ADA21 |
| SGDV-R90A01B002000 |
• Read and understand this manual before installing, operating, or
servicing this Drive. All warnings, cautions, and instructions must
be followed. All activity must be performed by qualified personnel.
The Drive must be installed according to this manual and local
codes.
• Do not connect or disconnect wiring while the power is on. Do not
remove covers or touch circuit boards while the power is on. Do not
remove or insert the digital operator while power is on.
• Before servicing, disconnect all power to the equipment. The
internal capacitor remains charged even after the power supply is
turned off. Status indicator LEDs and Digital Operator display will
be extinguished when the DC bus voltage is below 50 VDC. To prevent
electric shock, wait at least five minutes after all indicators are
OFF and measure DC bus voltage level to confirm safe level.
• Do not perform a withstand voltage test on any part of the unit.
This equipment uses sensitive devices and may be damaged by high
voltage.
• The Drive is not suitable for circuits capable of delivering more
than the specified RMS symmetrical amperes. Install adequate branch
short circuit protection per applicable codes. Refer to the
specification. Failure to do so may result in equipment damage
and/or personal injury.
• Do not connect unapproved LC or RC interference suppression
filters, capacitors, or overvoltage protection devices to the
output of the Drive. These devices may generate peak currents that
exceed Drive specifications.
• To avoid unnecessary fault displays caused by contactors or
output switches placed between Drive and motor, auxiliary contacts
must be properly integrated into the control logic circuit.
• YASKAWA is not responsible for any modification of the product
made by the user; doing so will void the warranty. This product
must not be modified.
• Verify that the rated voltage of the Drive matches the voltage of
the incoming power supply before applying power.
• To meet CE directives, proper line filters and proper
installation are required.
• Some drawings in this manual may be shown with protective covers
or shields removed, to describe details. These must be replaced
before operation.
• Observe electrostatic discharge procedures when handling circuit
cards to prevent ESD damage.
• The equipment may start unexpectedly upon application of power.
Clear all personnel from the drive, motor, and machine area before
applying power. Secure covers, couplings, shaft keys, and machine
loads before energizing the Drive.
• Please do not connect or operate any equipment with visible
damage or missing parts. The operating company is responsible for
any injuries or equipment damage resulting from failure to heed the
warnings in this manual.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
