Heated Ultrasonic Welding Machine Low Frequency 20Khz For
Ultrasonic Metal Spot Welder
Ultrasonic Metal Spot Welder
Ultrasonic metal welding is a special method to connect the same
metal or dissimilar metal with the mechanical vibration energy of
the ultrasonic frequency. When the metal is welded, the metal does
not transport the current to the workpiece and does not apply the
heat source to the workpiece. Only under the static pressure, the
mechanical energy is converted into internal energy, deformation
energy and there are A solid phase welding of two mother material
at the temperature of recrystallization. Therefore, it effectively
overcomes the spatter and oxidation caused by resistance welding.
The ultrasonic metal welder can be used for single point welding,
multi point welding and short strip welding of copper, silver,
aluminum, nickel and other non-ferrous metals. It should be widely
applied to the welding of silicon controlled lead wire, fuse piece,
electrical lead, lithium battery pole piece and pole ear.
Ultrasonic wave acting on the contact surface of the plastic, it
will produce tens of thousands of times per second vibration, this
is to achieve a certain amplitude of high-frequency vibration,
through the upper and welded parts of the ultrasonic energy
transmitted to the welding area, due to the welding area that two
welding interface at the interface, so it will produce a high
temperature. Also because of poor thermal conductivity, can not be
distributed in a timely manner, gathered in the welding area,
resulting in the rapid melting of the contact surface of the two
plastic, coupled with a certain pressure, so that their integration
into one. When the ultrasonic stop action, let the pressure last
for a few seconds, so that the solidification of the formation, so
that a solid molecular chain, to achieve the purpose of welding,
welding strength can be close to the original material strength.
Ultrasonic plastic welding depends on the amplitude of the
transducer horn, the added pressure and welding time etc. three
factors, welding time and welding pressure can be adjusted, the
amplitude by the transducer and amplitude. Bar decision. The three
interaction with appropriate value, energy exceeds the optimum
value, the amount of plastic melting is big, welding material easy
to deformation; if the energy is small, it is not easy to be
welded, the pressure also should not be too large. The optimal
pressure is the best pressure welding part of the side length of
1mm and the edge of each product.
Products Warranty:
The material which we sales will be for one year free maintain if
caused by quality itself problem,and to sure operation in correct
methods.
If the products damaged owing to your uncorrected use,we will
refuse the returned and will be required charge for maintain or
replace,please understand.
Don’t mail anything back to us before without any communication
with our service,thank you!
Our Services:
1.We offer R&D design, sample and mould making, machine
production one stop service, save your time and assure the quality.
2. Free technology support like free instruction, operation remote
trainning, operation video etc.
3. Delivery on time, and good after sales service, oversea service
is available. besides, we also offer all our customers one year
free-of-charge maintenance.
4. Free technology update for whole life
5. Customer service reponse in 24 hours
| Type | Power(W) | Frequency (KHz) |
| ARS-MSW20KHZ | 2000-2600W | 20KHZ |
Heated Ultrasonic Welding Machine Low Frequency 20Khz For
Ultrasonic Metal Spot Welder
