. Summary of pipe making machine, Tube mill line, Pipe mill
www.steelpipemakingmachine-tubemill.com
goodbusiness16@gmail.com
The pipe making machine, Tube mill line, Pipe mill is intended for manufacturing of round pipe of Φ12mm-Φ32mm with
thickness of 0.3mm–2.0mm from cold-rolled and hot-rolled coil strip
by means of unclosed tubular blank with its subsequent welding into
tube, edge heating by means of solid state high-frequency welder,
longitudinal seam welding in rolls of tube welding machine,
cooling, further sizing or shaping and on-stream cutting of endless
tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
II. The technical flow of pipe making machine, Tube mill line, Pipe mill the production line
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and
welder→→
Spiral Accumulator→→Forming section(Flattening unit +Main driving
unit +Forming unit +Guide unit +High frequency induction welding
unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit
and straightener →→Flying saw under computer-control →→ Run-out
table
III. Basic conditions:
a) Steel Pipe Specification of pipe making machine, Tube mill line, Pipe mill
1. Pipe diameter: Ø12–Ø32mm
Pipe Thickness: 0.3– 2.0mm
2. Square & Rectangle Pipe: 10X10mm –25X25mm
Pipe Thickness: 0.3 – 1.5mm
3. Pipe Length: 6.0m – 9.0m
4. Length Tolerance: 0-6mm
b) SteelTape Specification of pipe making machine, Tube mill line, Pipe mill
1. Material: Carbon steel (Q195)
2. Steel Tape: Inner diameter: Φ470-Φ510mm
Outer diameter: Φmax=1500mm
Strip steel width: 25mm-100mm
Strip steel thickness: 0.3mm-2.0mm
The maximum weight: 1.0 tons
c) Electric installed capacity: appro. 300KW
d) Size of the whole line: appro. 40X5m
e) Line Speed: 50-120m/min
